Ads
related to: magnetic pulse forming system for cooling air compressor model 97080
Search results
Results From The WOW.Com Content Network
A pinched aluminium can, produced from a pulsed magnetic field created by rapidly discharging 2 kilojoules from a high-voltage capacitor bank into a 3-turn coil of heavy gauge wire. Electromagnetic forming (EM forming or magneforming) is a type of high-velocity, cold forming process for electrically conductive metals, most commonly copper and ...
The magnetocaloric effect can be quantified with the following equation: = ((,)) ((,)) where is the adiabatic change in temperature of the magnetic system around temperature T, H is the applied external magnetic field, C is the heat capacity of the working magnet (refrigerant) and M is the magnetization of the refrigerant.
Figure 1: Schematic drawing of a Stirling-type single-orifice PTR. From left to right: a compressor, a heat exchanger (X 1), a regenerator, a heat exchanger (X 2), a tube (often called the pulse tube), a heat exchanger (X 3), a flow resistance (orifice), and a buffer volume. The cooling is generated at the low temperature T L. Room temperature ...
An explosively pumped flux compression generator (EPFCG) is a device used to generate a high-power electromagnetic pulse by compressing magnetic flux using high explosives. EPFCGs are physically destroyed during operation, making them single-use. They require a starting current pulse to operate, usually supplied by capacitors.
The term is most often used for smaller systems, typically table-top size, with input powers less than about 20 kW. Some can have input powers as low as 2–3 W. Large systems, such as those used for cooling the superconducting magnets in particle accelerators are more often called cryogenic refrigerators. Their input powers can be as high as 1 MW.
In a typical two-stage refrigerator, the first stage will offer higher cooling capacity but at higher temperature (≈ 77 K) with the second stage reaching ≈ 4.2 K and < 2.0 W of cooling power. In use, the first stage is used primarily for ancillary cooling of the cryostat with the second stage used primarily for cooling the magnet.