Search results
Results From The WOW.Com Content Network
Repeater frequency sets are known as "repeater pairs", and in the ham radio community most follow ad hoc standards for the difference between the two frequencies, commonly called the offset. In the USA two-meter band, the standard offset is 600 kHz (0.6 MHz), but sometimes unusual offsets, referred to as oddball splits , are used.
Radio amateurs may engage in satellite and space craft communications; however, the frequencies allowed for such activities are allocated separately from more general use radio amateur bands. Under the International Telecommunication Union 's rules, all amateur radio operations may only occur within 50 kilometres (31 mi) of the Earth's surface.
Repeaters are found in professional, commercial, and government mobile radio systems and also in amateur radio. Repeater systems use two different radio frequencies; the mobiles transmit on one frequency, and the repeater station receives those transmission and transmits on a second frequency.
Repeaters are the lifeline of the ham radio operator. They are the towers that relay messages between ham radios, accepting the weak incoming signal and then transmitting it at a higher power, so ...
The 10-meter band is a portion of the shortwave radio spectrum internationally allocated to amateur radio and amateur satellite use on a primary basis. The band consists of frequencies stretching from 28.000 to 29.700 MHz. [1]
The 1.25-meter, 220 MHz or 222 MHz band is a portion of the VHF radio spectrum internationally allocated for amateur radio use on a primary basis in ITU Region 2, and it comprises frequencies from 220 MHz to 225 MHz. [1]
American radio amateurs may use a maximum of one watt of radiated RF power, on any ham frequency authorized for data emissions, to control RC models. [10] Canadian radio amateurs may use any amateur frequency above 30 MHz for the control of RC models. [11] Plus or minus 5 MHz is a common repeater frequency offset in the 70 cm band.
Most amateur digital modes are transmitted by inserting audio into the microphone input of a radio and using an analog scheme, such as amplitude modulation (AM), frequency modulation (FM), or single-sideband modulation (SSB). Amateur teleprinting over radio (AMTOR) D-STAR (Digital Data) a high speed (128 kbit/s), data-only mode.