When.com Web Search

  1. Ads

    related to: compressor surge vs stall cleaner spray kit 1 1/4 x 6 x 6 1 2 x 5 7 8 fryer basket

Search results

  1. Results From The WOW.Com Content Network
  2. Compressor stall - Wikipedia

    en.wikipedia.org/wiki/Compressor_stall

    Comparison of normal and distorted airflow into the compressor section [1] A compressor stall is a local disruption of the airflow in the compressor of a gas turbine or turbocharger. A stall that results in the complete disruption of the airflow through the compressor is referred to as a compressor surge. The severity of the phenomenon ranges ...

  3. Surge in compressors - Wikipedia

    en.wikipedia.org/wiki/Surge_in_compressors

    Compressor surge in a system with a small gas reservoir is high-frequency and low-amplitude whereas a large gas reservoir leads to low-frequency and high-amplitude compressor surge; another rule of thumb is that compressor surge happens in a compressor with a large external volume and compressor stall tends to show up in a system with a short ...

  4. Compressor characteristic - Wikipedia

    en.wikipedia.org/wiki/Compressor_characteristic

    Compressor characteristic is a mathematical curve that shows the behaviour of a fluid going through a dynamic compressor.It shows changes in fluid pressure, temperature, entropy, flow rate etc.) with the compressor operating at different speeds.

  5. Compressor map - Wikipedia

    en.wikipedia.org/wiki/Compressor_map

    Compressor surge is a particular problem during slam-accelerations and can be overcome by suitable adjustments to the fueling schedule and/or use of blow-off (bleeding air off the compressor, for handling purposes). In the particular example shown, a slam-acceleration from ground idle would cause a high-pressure compressor surge.

  6. Blowoff valve - Wikipedia

    en.wikipedia.org/wiki/Blowoff_valve

    The sound produced by compressor surge is called turbo flutter and the repeated, high speed cycling will cause a cyclic torque on the compressor and may lead to increased stresses on the bearings and compressor impeller. [2] A blowoff valve is designed to release pressure in the intake system when the throttle is closed.

  7. Flow separation - Wikipedia

    en.wikipedia.org/wiki/Flow_separation

    In the case of airfoils, the pressure field modification results in an increase in pressure drag, and if severe enough will also result in stall and loss of lift, all of which are undesirable. For internal flows, flow separation produces an increase in the flow losses, and stall-type phenomena such as compressor surge, both undesirable ...