Ads
related to: self leveling concrete vs epoxy floor cost per sq ft
Search results
Results From The WOW.Com Content Network
Even though the injection pressure is relatively low, compared to Foam Leveling, Stone Slurry Grout Leveling has a high compressive strength of 240 pounds per square inch. [4] This is equal to 34,560 pounds of lifting force per square foot. With Portland cement added, this can increase to over 6,000 psi [5] or 864,000 pounds per square foot ...
Self-consolidating concrete or self-compacting concrete (SCC) [1] is a concrete mix which has a low yield stress, high deformability, good segregation resistance (prevents separation of particles in the mix), and moderate viscosity (necessary to ensure uniform suspension of solid particles during transportation, placement (without external compaction), and thereafter until the concrete sets).
Concrete has a limited lifespan between batching / mixing and curing. This means that ready-mixed concrete should be placed within 30 to 45 minutes of the batching process to hold slump and mix design specifications in the US, [15] though in the UK, environmental and material factors, plus in-transit mixing, allow for up two hours to elapse. [16]
Expanded polystyrene (EPS) concrete (also known as EPScrete, EPS concrete or lightweight concrete) is a form of concrete known for its light weight made from cement and EPS (Expanded Polystyrene). It is a popular material for use in environmentally "green" homes.
Polymer concrete is a type of concrete that uses a polymer to replace lime-type cements as a binder. One specific type is epoxy granite , where the polymer used is exclusively epoxy . In some cases the polymer is used in addition to portland cement to form Polymer Cement Concrete (PCC) or Polymer Modified Concrete (PMC). [ 1 ]
Other reasons for covering concrete with synthetic resin flooring are to improve resistance to chemicals, enhancing resistance to impact and wear, and for aesthetic appearance purposes. Seamless polymer flooring can take many forms: [8] Floor seals applied at less than 6 mil (0.15 mm) Floor coatings applied at 6 - 12 mil (0.15 – 0.3 mm)