Search results
Results From The WOW.Com Content Network
Multiple different storage resources can reside in the same storage pool, and multiple storage pools can be configured within the same DPE/DAE array. Each storage pool is tiered based on the performance characteristics of the storage technology used, with SSD-based storage at the top “extreme performance tier,” serial-attached SCSI (SAS) in ...
Storage servers housing 24 SAS hard disk drives per server. A typical Serial Attached SCSI system consists of the following basic components: An initiator: a device that originates device-service and task-management requests for processing by a target device and receives responses for the same requests from other target devices.
SES-2 SCSI Enclosure Services (SES) permit the management and sense the state of power supplies, cooling devices, LED displays, indicators, individual drives, and other non-SCSI elements installed in an enclosure. SES2 alerts users about drive, temperature and fan failures with an audible alarm and a fan failure LED.
NetApp FAS3240-R5. Modern NetApp FAS, AFF or ASA system consist of customized computers with Intel processors using PCI.Each FAS, AFF or ASA system has non-volatile random access memory, called NVRAM, in the form of a proprietary PCI NVRAM adapter or NVDIMM-based memory, to log all writes for performance and to play the data log forward in the event of an unplanned shutdown.
The location of a global array can be determined at compile time, whereas local array location can only be determined when the subprogram is called and depends on the stack pointer value. As a consequence, the global arrays are accessed with offset addressing mode with constant 0 while local arrays, excluding the first, are accessed with ...
The SAS is a new generation serial communication protocol for devices designed to allow for much higher speed data transfers and is compatible with SATA. SAS uses a mechanically identical data and power connector to standard 3.5-inch SATA1/SATA2 HDDs, and many server-oriented SAS RAID controllers are also capable of addressing SATA hard drives.
A disk array controller provides front-end interfaces and back-end interfaces. The back-end interface communicates with the controlled disks. Hence, its protocol is usually ATA (a.k.a. PATA), SATA, SCSI, FC or SAS. The front-end interface communicates with a computer's host adapter (HBA, Host Bus Adapter) and uses:
Most current VTL solutions use SAS or SATA disk arrays as the primary storage component due to their relatively low cost. The use of array enclosures increases the scalability of the solution by allowing the addition of more disk drives and enclosures to increase the storage capacity.