Ads
related to: removing bottom bracket on bike chain lock length 4 cm height
Search results
Results From The WOW.Com Content Network
The bottom bracket height is the vertical distance from the center of the bottom bracket to the ground, and it expresses clearance of the frame over obstacles. The height of the bottom bracket is of concern when designing the frame. The height of the bottom bracket is the baseline for the rider's height while riding.
Bottom bracket wrench for newer bottom bracket styles Crank extractor. A chain tool or chain splitter is used to 'break' a chain, in order to remove it from a bike or remove links, or to put a chain back together. A crank extractor is used to pull the crank off the bottom bracket spindle. A pedal wrench removes the pedals from the bicycle. It ...
Chainstay: a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends; Chain tensioner: a device to maintain proper chain tension; Chaintug: a device to aid in setting the proper chain tension; Cluster: a bicycle cogset, either a freewheel, or cassette
The chain stays run parallel to the chain, connecting the bottom bracket shell (which holds the axis around which the pedals and cranks rotate) to the rear fork ends or dropouts. A shorter chain stay generally means that the bike will accelerate faster and be easier to ride uphill, at least while the rider can avoid the front wheel losing ...
Q factor is a function of both the bottom bracket width (axle length) and the cranks. Bottom brackets axles vary in length from 102mm to 127mm. Mountain bike cranks are typically about 20mm wider than road cranks. [6] A larger Q factor (wider tread) will mean less cornering clearance (while pedaling) for the same bottom bracket height and crank ...
The chain in use on modern bicycles has a 1 ⁄ 2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in "#40" indicates the pitch of the chain in eighths of an inch; and ISO standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
Crank length is measured from the center of the pedal spindle to the center of the bottom bracket spindle or axle. The larger bicycle component manufacturers typically offer crank lengths for adult riders from 165 to 180 mm (6.5 to 7.1 in) long in 2.5 mm (0.098 in) increments, with 170 mm (6.7 in) cranks being the most common size.
A derailleur is a variable-ratio bicycle gearing system consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another. [ 1 ] Modern front and rear derailleurs typically consist of a moveable chain-guide that is operated remotely by a Bowden cable attached to a shifter mounted on the ...