Ads
related to: signs of clogged fuel injectors on 2012 mercury optimax 115 ecm
Search results
Results From The WOW.Com Content Network
The pump element is still on the way down, the solenoid is now energised and the fuel line is immediately closed. The fuel cannot pass back into the return duct, and is now compressed by the plunger until pressure exceeds specific “opening” pressure, and the injector nozzle needle lifts, allowing fuel to be injected into the combustion chamber.
A thermotime switch, or TTS, is a sensor used to control the cold start enrichment process in some older fuel injection systems. An extra injector is placed in the inlet manifold designed to feed all of the cylinders, and whilst the other injectors have flow rates controlled by pulse duration, the cold start injector stays on during the initial cold starting procedure.
Common rail fuel system on a Volvo truck engine. In 1916 Vickers pioneered the use of mechanical common rail systems in G-class submarine engines. For every 90° of rotation, four plunger pumps allowed a constant injection pressure of 3,000 pounds per square inch (210 bar; 21 MPa), with fuel delivery to individual cylinders being shut off by valves in the injector lines. [1]
The fuel injector is effectively a spray nozzle that performs the final stage in the delivery of fuel into the engine. The injector is located in the combustion chamber, inlet manifold or – less commonly – the throttle body. Fuel injectors which also control the metering are called injection valves, while injectors that perform all three ...
An engine control unit (ECU), also called an engine control module (ECM), [1] is a device that controls various subsystems of an internal combustion engine. Systems commonly controlled by an ECU include the fuel injection and ignition systems.
The fuel being injected was described as being in vapour phase having been heated by the engine cylinder. The pressure of the fuel was regulated at the fuel pump, and the amount of fuel admitted was controlled by mechanical means at the rotary admission valve. It seems this radical design wasn't taken further by F. E. Baker.
Injection pump for a 12-cylinder diesel engine. An injection pump is the device that pumps fuel into the cylinders of a diesel engine.Traditionally, the injection pump was driven indirectly from the crankshaft by gears, chains or a toothed belt (often the timing belt) that also drives the camshaft.
Indirect injection in an internal combustion engine is fuel injection where fuel is not directly injected into the combustion chamber. Gasoline engines equipped with indirect injection systems, wherein a fuel injector delivers the fuel at some point before the intake valve, have mostly fallen out of favor to direct injection. However, certain ...