Ads
related to: asymmetric dsl vs symmetric 1 3 8 crows foot wrench 1 1 4 as an improper fraction
Search results
Results From The WOW.Com Content Network
G.dmt full-rate ADSL expands the usable bandwidth of existing copper telephone lines, delivering high-speed data communications at rates up to 8 Mbit/s downstream and 1.3 Mbit/s upstream. [ 1 ] DMT allocates from 2 to 15 bits per channel (bin).
The main difference between this specification and Annex A is that the upstream/downstream frequency split has been shifted from 138 kHz up to 276 kHz (as in Annex B/Annex J), allowing upstream bandwidth to be increased from 1.4 Mbit/s to 3.3 Mbit/s, with a corresponding decrease in download bandwidth.
G.992.5 (also referred to as ADSL2+, G.dmt.bis+, and G.adslplus) [1] is an ITU-T standard for asymmetric digital subscriber line (ADSL) broadband Internet access. The standard has a maximum theoretical downstream sync speed of 24 megabits per second (Mbit/s). Utilizing G.992.5 Annex M upstream sync speeds of 3.3 Mbit/s can be achieved.
SDSL is a rate-adaptive digital subscriber line (DSL) variant with T1/E1-like data rates (T1: 1.544 Mbit/s, E1: 2.048 Mbit/s). It runs over one pair of copper wires, with a maximum range of 10,000 feet (3,000 m). It cannot co-exist with a conventional voice service on the same pair as it takes over the entire bandwidth. [1]
Digital subscriber line (DSL; originally digital subscriber loop) is a family of technologies that are used to transmit digital data over telephone lines. [1] In telecommunications marketing, the term DSL is widely understood to mean asymmetric digital subscriber line (ADSL), the most commonly installed DSL technology, for Internet access .
Tones are spaced apart by 4.3125kHz. In the Annex A, L and M frequency standards, POTS (analog PSTN voice) occupies (what would be) tones 0-3, tones 4-7 are reserved for a ‘guard band’, and the upstream DSL transmission band uses tones 8-31 in Annex A and L, or 8-56 in Annex M. In Annex B, ISDN occupies tones 0-31, DSL upstream uses tones ...
Annex J is a specification in ITU-T Recommendations G.992.3 and G.992.5 for all digital mode ADSL with improved spectral compatibility with ADSL over ISDN, which means that it is a type of naked DSL which will not disturb existing Annex B ADSL services in the same cable binder. [1] [2]
ITU G.992.3 is an ITU (International Telecommunication Union) standard, also referred to as ADSL2 or G.dmt.bis.It optionally extends the capability of basic ADSL in data rates to 12 Mbit/s downstream and, depending on Annex version, up to 3.5 Mbit/s upstream (with a mandatory capability of ADSL2 transceivers of 8 Mbit/s downstream and 800 kbit/s upstream). [1]