Ads
related to: antenna mount height for reception table chart size 40
Search results
Results From The WOW.Com Content Network
Height above average terrain (HAAT), or (less popularly) effective height above average terrain (EHAAT), is the vertical position of an antenna site above the surrounding landscape. HAAT is used extensively in FM radio and television , as it is more important than effective radiated power (ERP) in determining the range of broadcasts ( VHF and ...
VHF is the first band at which wavelengths are small enough that efficient transmitting antennas are short enough to mount on vehicles and handheld devices, a quarter wave whip antenna at VHF frequencies is 25 cm to 2.5 meter (10 inches to 8 feet) long.
In telecommunications, the effective height of an antenna is the height of the antenna's center of radiation above the ground. In low-frequency applications involving loaded or nonloaded vertical antennas, the effective height is the moment of the current distribution in the vertical section, divided by the input current. For an antenna with a ...
The antenna can have a smaller or larger number of rod elements; in general, the more elements, the higher the gain and the more directional. Another design used mainly for UHF reception is the reflective array antenna, consisting of a vertical metal screen with multiple dipole elements mounted in front of it.
The category of simple antennas consists of dipoles, monopoles, and loop antennas. Nearly all can be made with a single segment of wire (ignoring the break made in the wire for the feedline connection). [citation needed] Dipoles and monopoles called linear antennas (or straight wire antennas) since their radiating parts lie along a single ...
The antenna's feed point is at the center of the disc. It is usually fed with 50-ohm coaxial cable, with the center conductor connected to the disc, and the outer conductor to the cone. The cone: The length of the cone should be a quarter wavelength of the antenna's lowest operating frequency. [2] The cone angle is generally from 25 to 40 degrees.
Omnidirectional radiation patterns are produced by the simplest practical antennas, monopole and dipole antennas, consisting of one or two straight rod conductors on a common axis. Antenna gain (G) is defined as antenna efficiency (e) multiplied by antenna directivity (D) which is expressed mathematically as: =.
The gain and input impedance of the antenna is dependent on the length of the whip element, compared to a wavelength, but also on the size and shape of the ground plane used (if any). A quarter wave vertical antenna working against a perfectly conducting, infinite ground will have a gain of 5.19 dBi and a radiation resistance of about 36.8 ohms.