Search results
Results From The WOW.Com Content Network
This is a list of interface bit rates, is a measure of information transfer rates, or digital bandwidth capacity, at which digital interfaces in a computer or network can communicate over various kinds of buses and channels.
This is a list of very-high-bit-rate digital subscriber line (VDSL) and very-high-bit-rate digital subscriber line 2 (VDSL2) deployments.. The term VDSL can either refer specifically to ITU-T G.993.1 (first generation VDSL, officially abbreviated as "VDSL", unofficially also called "VDSL1"), or may be used as an umbrella term for both ITU-T G.993.1 and ITU-T G.993.2 (second generation VDSL ...
The ISQ symbols for the bit and byte are bit and B, respectively.In the context of data-rate units, one byte consists of 8 bits, and is synonymous with the unit octet.The abbreviation bps is often used to mean bit/s, so that when a 1 Mbps connection is advertised, it usually means that the maximum achievable bandwidth is 1 Mbit/s (one million bits per second), which is 0.125 MB/s (megabyte per ...
It is a flat zone and for this reason GTR PUCP installed towers with an average height of 80 meters (260'). The link was established in 2007. GTR PUCP, the regional government of Loreto, and Vicariate San José de Amazonas are working together on maintenance of the network. Frequency channels used: 1, 6 and 11, 802.11g non-interfered channels
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
A zone transfer uses the Transmission Control Protocol (TCP) for transport, [1] [2] and takes the form of a client–server transaction. The client requesting a zone transfer may be a secondary server requesting data from a primary server. [3] The portion of the database that is replicated is a zone.
The format of a zone file is defined in RFC 1035 (section 5) and RFC 1034 (section 3.6.1). This format was originally used by the Berkeley Internet Name Domain (BIND) software package, but has been widely adopted by other DNS server software – though some of them (e.g. NSD, PowerDNS) are using the zone files only as a starting point to compile them into database format, see also Microsoft ...
The 1280 × 1024 resolution is not the standard 4:3 aspect ratio, instead it is a 5:4 aspect ratio (1.25:1 instead of 1. 3:1). A standard 4:3 monitor using this resolution will have rectangular rather than square pixels, meaning that unless the software compensates for this the picture will be distorted, causing circles to appear elliptical.