Ads
related to: vsync vs triple buffered memory card definition
Search results
Results From The WOW.Com Content Network
This waiting period could be several milliseconds during which neither buffer can be touched. In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor.
PS Vita Memory Card 2012 64 GB Subcompact (15 mm × 12.5 mm × 1.6 mm [7]), compulsory DRM, up to 64 GB, proprietary (can be used on PS Vita only) P2 (storage media) Panasonic MicroP2: 2012 64 GB MicroP2 is a SDXC/SDHC card conforming to UHS-II (Ultra High Speed bus), and can be read by common SDHC/SDXC card readers. xD: Olympus, Fujifilm, Sony
A memory rank is a set of DRAM chips connected to the same chip select, which are therefore accessed simultaneously. In practice all DRAM chips share all of the other command and control signals, and only the chip select pins for each rank are separate (the data pins are shared across ranks).
Registered (Buffered) DIMM (R-DIMM or RDIMM) modules insert a buffer between the pins of the command and address buses on the DIMM and the memory chips. A high-capacity DIMM might have numerous memory chips, each of which must receive the memory address, and their combined input capacitance limits the speed at which the memory bus can operate.
A graphical depiction of a triple-buffered swap chain. In every swap chain there are at least two buffers. The first framebuffer, the screenbuffer, is the buffer that is rendered to the output of the video card. The remaining buffers are known as backbuffers.
In computer science, a data buffer (or just buffer) is a region of memory used to store data temporarily while it is being moved from one place to another. Typically, the data is stored in a buffer as it is retrieved from an input device (such as a microphone) or just before it is sent to an output device (such as speakers); however, a buffer may be used when data is moved between processes ...
Ways to prevent video tearing depend on the display device and video card technology, the software in use, and the nature of the video material. The most common solution is to use multiple buffering. Most systems use multiple buffering and some means of synchronization of display and video memory refresh cycles. [3]
Registered, or buffered, memory is not the same as ECC; the technologies perform different functions. It is usual for memory used in servers to be both registered, to allow many memory modules to be used without electrical problems, and ECC, for data integrity.