Search results
Results From The WOW.Com Content Network
Etching is a critically important process module in fabrication, and every wafer undergoes many etching steps before it is complete. For many etch steps, part of the wafer is protected from the etchant by a "masking" material which resists etching. In some cases, the masking material is a photoresist which has been patterned using photolithography.
Xenon difluoride, bromine trifluoride, chlorine trifluoride and fluorine can be used for gaseous silicon etching. [6] [7] Xenon difluoride is most commonly used to etch silicon in academia and industry, because it has a high selectivity towards other semiconductor materials, allows high process control and is easy to use at room temperature. [8 ...
The dry etch is then performed so that structured etching is achieved. After the process, the remaining photoresist has to be removed. This is also done in a special plasma etcher, called an asher. [14] Dry etching allows a reproducible, uniform etching of all materials used in silicon and III-V semiconductor technology. By using inductively ...
Reactive-ion etching (RIE) is an etching technology used in microfabrication. RIE is a type of dry etching which has different characteristics than wet etching . RIE uses chemically reactive plasma to remove material deposited on wafers .
Wafer fabrication is a procedure composed of many repeated sequential processes to produce complete electrical or photonic circuits on semiconductor wafers in a semiconductor device fabrication process. Examples include production of radio frequency amplifiers, LEDs, optical computer components, and microprocessors for computers. Wafer ...
Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Wikimedia Commons has media related to Etching (microfabrication) . Pages in category "Etching (microfabrication)"
Dry etching refers to the removal of material, typically a masked pattern of semiconductor material, by exposing the material to a bombardment of ions (usually a plasma of reactive gases such as fluorocarbons, oxygen, chlorine, boron trichloride; sometimes with addition of nitrogen, argon, helium and other gases) that dislodge portions of the material from the exposed surface.
In semiconductor manufacturing, isotropic etching is a method commonly used to remove material from a substrate via a chemical process using an etchant substance. The etchant may be in liquid-, gas- or plasma-phase, [1] although liquid etchants such as buffered hydrofluoric acid (BHF) for silicon dioxide etching are more often used.