Search results
Results From The WOW.Com Content Network
Gear inches is one way of measuring the gear ratio(s) of a bicycle, so that different gears and different bicycles can be compared in a consistent manner. Gear inches is an imperial measure corresponding to the diameter in inches of the drive wheel of a penny-farthing bicycle with equivalent ( direct-drive ) gearing.
One standard option for the Brompton folding bicycle is to use a 3-speed hub gear (roughly a 30% difference between gear ratios) in combination with a 2-speed derailleur gear (roughly a 15% difference) to give 6 distinct gear ratios; this is an example of half-step gearing. Some Brompton suppliers offer a 2-speed chainring 'Mountain Drive' as ...
Typical ratios would be 22/32/44 teeth as opposed to 28/38/48 or 24/36/46 teeth. These would be used with smaller cassettes (Generally cassettes are available with 11 tooth minimum gear sizes for compact chainsets while standard chainsets were designed for cassettes with a 13 or 14 tooth top gear), giving the same overall ratio.
The THM400 was the first three-speed, Simpson-geared automatic to use overrunning clutches for both first and second gear reaction, a feature that eliminated the need to coordinate the simultaneous release of a band and application of a clutch to make the 2-3 gear change. Owing to this feature, as well as the use of a large, multi-plate clutch ...
Profile of a spur gear Notation and numbering for an external gear Notation and numbering for an internal gear. The tooth surface (flank) forms the side of a gear tooth. [1] It is convenient to choose one face of the gear as the reference face and to mark it with the letter “I”. The other non-reference face might be termed face “II”.
It was equipped with five direct friction plates. These automatics had lower first- and second-gear ratios, allowing the lower-powered engines to provide better acceleration without sacrificing highway fuel economy. They were frequently used today in drag racing. Uses: 1975-1980 360 (2-bbl) 1984-1989 318 (4-bbl Police)
A dragstrip is a facility for conducting automobile and motorcycle acceleration events such as drag racing. Although a quarter mile (1320 feet, 402 m) is the best known measure for a drag track, many tracks are eighth mile (201 m) tracks, and the premiere classes will run 1,000 foot (304.8 m) races.
An even uniform gear wear is achieved by ensuring the tooth counts of the two gears meshing together are relatively prime to each other; this occurs when the greatest common divisor (GCD) of each gear tooth count equals 1, e.g. GCD(16,25)=1; if a 1:1 gear ratio is desired a relatively prime gear may be inserted in between the two gears; this ...