Search results
Results From The WOW.Com Content Network
Electroplating baths and equipment based on the patents of the Elkingtons were scaled up to accommodate the plating of numerous large-scale objects and for specific manufacturing and engineering applications. The plating industry received a big boost with the advent of the development of electric generators in the late 19th
Copper plating on aluminium. Copper electroplating is the process of electroplating a layer of copper onto the surface of a metal object. Copper is used both as a standalone coating and as an undercoat onto which other metals are subsequently plated. [1]
LIGA consists of three main processing steps: lithography, electroplating, and molding. There are two main LIGA-fabrication technologies: X-Ray LIGA, which uses X-rays produced by a synchrotron to create high-aspect-ratio structures, and UV LIGA, a more accessible method which uses ultraviolet light to create structures with relatively low aspect ratios.
Nickel electroplating is a process of depositing nickel onto a metal part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. [3] To clean and protect the part during the plating process, a combination of heat treating, cleaning, masking, pickling, and etching may be used. [1]
Such zinc electroplating or zinc alloy electroplating maintains a dominant position among other electroplating process options, based upon electroplated tonnage per annum. According to the International Zinc Association, more than 5 million tons are used yearly for both hot-dip galvanization and electroplating. [ 1 ]
Electropolishing, also known as electrochemical polishing, anodic polishing, or electrolytic polishing (especially in the metallography field), is an electrochemical process that removes material from a metallic workpiece, reducing the surface roughness by levelling micro-peaks and valleys, improving the surface finish.
Electroless deposition is an important process in the electronic industry for metallization of substrates. Other metallization of substrates also include physical vapor deposition (PVD), chemical vapor deposition (CVD), and electroplating which produce thin metal films but require high temperature, vacuum, and a power source respectively. [20]
The processed surface is then coated with electroless copper or nickel before further plating. This process gives useful (about 1 to 6 kgf /cm or 10 to 60 N /cm or 5 to 35 lbf /in) adhesion force, but is much weaker than actual metal-to-metal adhesion strength.