Search results
Results From The WOW.Com Content Network
Colloidal silica gel with light opalescence. Silica gel is an amorphous and porous form of silicon dioxide (silica), consisting of an irregular tridimensional framework of alternating silicon and oxygen atoms with nanometer-scale voids and pores. The voids may contain water or some other liquids, or may be filled by gas or vacuum.
The lowest-density silica nanofoam weighs 1,000 g/m 3, [59] which is the evacuated version of the record-aerogel of 1,900 g/m 3. [60] The density of air is 1,200 g/m 3 (at 20 °C and 1 atm). [61] The silica solidifies into three-dimensional, intertwined clusters that make up only 3% of the volume. Conduction through the solid is therefore very low.
In acidic solutions, the silicate ions react with hydrogen ions to form silicic acids, which tend to decompose into hydrated silicon dioxide gel. [citation needed] Heated to drive off the water, the result is a hard translucent substance called silica gel, widely used as a desiccant. It can withstand temperatures up to 1100 °C. [citation needed]
Using a programmable thermostat's setback feature to limit heating or cooling in a temporarily unoccupied building does not waste as much energy as leaving the temperature constant. Using setback saves energy (5–15%) because heat transfer across the surface of the building is roughly proportional to the temperature difference between its ...
Superabsorbent polymer powder. A superabsorbent polymer (SAP) (also called slush powder) is a water-absorbing hydrophilic homopolymers or copolymers [1] that can absorb and retain extremely large amounts of a liquid relative to its own mass.
Fumed silica with surface area of 130 m 2 /g . Fumed silica (CAS number 7631-86-9, also 112945-52-5), also known as pyrogenic silica because it is produced in a flame, consists of microscopic droplets of amorphous silica fused into branched, chainlike, three-dimensional secondary particles which then agglomerate into tertiary particles.
Colloidal silicas are most often prepared in a multi-step process where an alkali-silicate solution is partially neutralized, leading to the formation of silica nuclei. The subunits of colloidal silica particles are typically in the range of 1 to 5 nm. Whether or not these subunits are joined depends on the conditions of polymerization.
Precipitated silica is an amorphous form of silica (silicon dioxide, SiO 2); it is a white, powdery material. Precipitated silica is produced by precipitation from a solution containing silicate salts. The three main classes of amorphous silica are pyrogenic silica, precipitated silica and silica gel.