Search results
Results From The WOW.Com Content Network
The small size, low top speed (20 mph or 32 km/h) and low power output (150 hp or 110 kW) of the locomotive made it unsuitable for much beyond switching duties. GE specifically marketed the locomotive as an industrial switcher with a low cost.
10,433 horsepower (7,780 kW) 1-hour rating; 9,977 horsepower (7,440 kW) continuous rating One of the most powerful electric locomotives ever built, it also is the most powerful (short term) single-frame locomotive ever built (currently [ when? ] its maximum short term power is limited to 12,000 horsepower (8,948 kW )); It has immense short term ...
When it was introduced in 1987, the Series 60 was the first heavy-duty diesel engine with fully integrated electronic controls. [2] Detroit Diesel prescribed overhaul intervals of 500,000 miles (800,000 km), then raised that to 750,000 miles (1,210,000 km) after more experience was gained with the new engine.
The Series 92 engines were introduced in 1974. [8] Compared to the Series 71 engines they were derived from, the Series 92 featured a larger bore of 4.84025 ± 0.00125 in (122.942 ± 0.032 mm) and an identical stroke of 5 in (130 mm) for a nominal displacement per cylinder of 92 cu in (1,510 cc), from which the Series 92 derives its name.
The Navistar DT (Diesel Turbocharged or Diesel Turbo) engine family is a line of mid-range inline-6 diesel engines.With horsepower ratings ranging from 170 hp (130 kW) to 350 hp (260 kW), the Navistar DT engines are used primarily in medium-duty truck and bus applications such as school buses, although some versions have been developed for heavy-duty regional-haul and severe-service applications.
The original price for the 16 hp (12 kW) version was $70 lower (at US$228) than their single-cylinder cast-iron version bearing the same power rating. [ 18 ] Industrial/Commercial (I/C) – This series of engines, initially ranging from 3 to 20.5 hp (15.3 kW), was introduced in 1979 as Briggs & Stratton's answer to high quality commercial-duty ...
Many M1028s were upgraded at the company level to M1028A2 and A3 specs—the dual wheel rear end arrangement was a result of the M1028 flipping on its side because of the high center of gravity when carrying equipment shelters. [14] GM produced some 70,000 CUCVs from 1983 to 1986 (model years were 1984–1987), though most were model year 1984 ...
Advertised by Fairbanks-Morse as "the most useful locomotive ever built", the 2,400-horsepower (1.8 MW) H-24-66 Train Master was the most powerful single-engine diesel locomotive at its introduction in 1953. No competitor offered a locomotive with an equal horsepower rating until the ALCO RSD-7 entered production in January 1954.