When.com Web Search

Search results

1. Results From The WOW.Com Content Network

2. Tipped tool - Wikipedia

   en.wikipedia.org/wiki/Tipped_tool

   A tipped tool is any cutting tool in which the cutting edge consists of a separate piece of material that is brazed, welded, or clamped onto a body made of another material. In the types in which the cutter portion is an indexable part clamped by a screw, the cutters are called inserts (because they are inserted into the tool body).

3. Blanking and piercing - Wikipedia

   en.wikipedia.org/wiki/Blanking_and_piercing

   Because the material is so tightly held and controlled in this setup, part flatness remains very true, distortion is nearly eliminated, and edge burr is minimal. Clearances between the die and punch are generally around 1% of the cut material thickness, which typically varies between 0.5–13 mm (0.020–0.512 in). [ 8 ]

4. Cutting tool (machining) - Wikipedia

   en.wikipedia.org/wiki/Cutting_tool_(machining)

   This factor describes the form of the cutting edge. 3 angles: clearance angle, wedge angle, rake (chipping) angle; Δr; length and orientation of the bevel; Cutting edge profile with parameters. One of the most important cutting edge parameters is the K factor. It specifies the form of the cutting edge. 1 means a symmetric cutting edge. If the ...

5. Wood-burning stove - Wikipedia

   en.wikipedia.org/wiki/Wood-burning_stove

   A 19th-century example of a wood-burning stove. A wood-burning stove (or wood burner or log burner in the UK) is a heating or cooking appliance capable of burning wood fuel, often called solid fuel, and wood-derived biomass fuel, such as sawdust bricks.

6. Glossary of woodworking - Wikipedia

   en.wikipedia.org/wiki/Glossary_of_woodworking

   Any tool with a characteristically shaped cutting edge used for carving or cutting a hard material such as wood, stone, or metal by hand, with a mallet, or with mechanical power. Chiselling involves forcing the blade or cutting edge into the material in order to cut it. chop saw chops A type of vise. circular saw clamp. Also called a cramp.

7. Built up edge - Wikipedia

   en.wikipedia.org/wiki/Built_up_edge

   The built up edge effectively changes tool geometry and rake steepness. It also reduces the contact area between the chip and the cutting tool, [1] leading to: A reduction in the power demand of the cutting operation. [1] Slight increase in tool life, since the cutting is partly being done by the built up edge rather than the tool itself. [4]