Ads
related to: best material for boat transom
Search results
Results From The WOW.Com Content Network
Knee timbers in boat building. In woodworking, a knee is a natural or cut curved piece of wood. [1] Knees, sometimes called ship's knees, are a common form of bracing in boat building and occasionally in timber framing. A knee rafter in carpentry is a bent rafter used to gain head room in an attic.
Vertical transom and stern of a modern cargo ship. In some boats and ships, a transom is the aft transverse surface of the hull that forms the stern of a vessel. Historically, they are a development from the canoe stern (or "double-ender") wherein which both bow and stern are pointed. Transoms add both strength and width to the stern.
Frame numbers typically begin at 1 with the forward-most frame for US-built ships, and typically begin at 0 with the transom for ships built elsewhere, with numbers increasing sequentially towards the stern or bow, respectively. The total number vary per the length of a ship.
Wood is the traditional boat building material used for hull and spar construction. It is buoyant, widely available and easily worked. It is a popular material for small boats (of e.g. 6-metre (20 ft) length; such as dinghies and sailboats).
A johnboat in Florida, 1972 A small modern johnboat in the bed of a pickup truck. A johnboat [1] is a flat-bottomed boat [2] constructed of aluminum, fiberglass, wood, or polyethelene with one, two, or three seats, usually bench type.
J/22. The J/22 is a recreational keelboat, built predominantly of fiberglass over a Baltex core, with teak wood trim. It has a fractional sloop rig with aluminum spars, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a fixed fin keel.
For smaller boats, the floor and hull are often flexible, while for boats longer than 3 metres (9.8 ft), the floor typically consists of three to five rigid plywood or aluminium sheets fixed between the tubes, but not joined rigidly together. Often the transom is rigid, providing a location and structure for mounting an outboard motor.
The boat has a draft of 4.67 ft (1.42 m) with the centerboard extended and 1.75 ft (0.53 m) with it retracted, allowing operation in shallow water, or ground transportation on a trailer. [ 1 ] [ 3 ] The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering.