Search results
Results From The WOW.Com Content Network
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.
The centimetre (SI symbol: cm) is a unit of length in the metric system equal to 10 −2 metres ( 1 / 100 m = 0.01 m). To help compare different orders of magnitude, this section lists lengths between 10 −2 m and 10 −1 m (1 cm and 1 dm). 1 cm – 10 millimeters; 1 cm – 0.39 inches; 1 cm – edge of a square of area 1 cm 2
A metric ounce is an approximation of the imperial ounce, US dry ounce, or US fluid ounce. These three customary units vary. However, the metric ounce is usually taken as 25 or 30 ml (0.88 or 1.06 imp fl oz; 0.85 or 1.01 US fl oz) when volume is being measured, or in grams when mass is being measured.
Subdivisions of an inch are typically written using dyadic fractions with odd number numerators; for example, two and three-eighths of an inch would be written as 2 + 3 / 8 ″ and not as 2.375″ nor as 2 + 6 / 16 ″. However, for engineering purposes fractions are commonly given to three or four places of decimals and have been ...
The decibel originates from methods used to quantify signal loss in telegraph and telephone circuits. Until the mid-1920s, the unit for loss was miles of standard cable (MSC). 1 MSC corresponded to the loss of power over one mile (approximately 1.6 km) of standard telephone cable at a frequency of 5000 radians per second (795.8 Hz), and matched closely the smallest attenuation detectable to a ...
A barn (symbol: b) is a metric unit of area equal to 10 −28 m 2 (100 fm 2).This is equivalent to a square that is 10 −14 m (10 fm) each side, or a circle of diameter approximately 1.128 × 10 −14 m (11.28 fm).
d = run Δh = rise l = slope length α = angle of inclination. The grade (US) or gradient (UK) (also called stepth, slope, incline, mainfall, pitch or rise) of a physical feature, landform or constructed line is either the elevation angle of that surface to the horizontal or its tangent.
Approximations were subsequently employed, largely owing to the Didot point's unwieldy conversion to metric units (the divisor of its conversion ratio has the prime factorization of 3 × 7 × 1979). In 1878, Hermann Berthold defined 798 points as being equal to 30 cm, or 2660 points equalling 1 meter: that gives around 0.376 mm to the point.