Search results
Results From The WOW.Com Content Network
The speed to fly is the optimum speed through sinking or rising air mass to achieve either the furthest glide, or fastest average cross-country speed. [1] Most speed to fly setups use units of either airspeed in kilometers per hour (km/h) and climb rate in meters per second (m/s), or airspeed in knots (kn) and climb rate in feet per minute (ft ...
The maximum range condition is obtained at maximum lift/drag ratio (L/DMAX) The maximal total range is the maximum distance an aircraft can fly between takeoff and landing . Powered aircraft range is limited by the aviation fuel energy storage capacity (chemical or electrical) considering both weight and volume limits. [ 1 ]
This is the speed at which drag is minimised. For jet aircraft, "long-range cruise" speed (LRC) is defined as the speed which gives 99% of the maximum range, for a given weight. This results in a 3–5% increase in speed. [8] It is also a more stable speed than maximum range speed, so gives less autothrottle movement. [9]
Subsonic aircraft must not fly faster than a specific percentage of the speed of sound. Usually passenger airliners do not fly faster than around 85% of speed of sound, or Mach 0.85. Supersonic aircraft, like the Concorde and military fighters, use the Machmeter as the main speed instrument with the exception of take-offs and landings.
Here the speed is displayed both in knots (kn) and miles per hour (mph). The true airspeed (TAS; also KTAS, for knots true airspeed) of an aircraft is the speed of the aircraft relative to the air mass through which it is flying. The true airspeed is important information for accurate navigation of an aircraft.
Celebrities including Robbie Williams and Gordon Ramsay may have been vilified in the press for turning left on a plane while their children turn right – but it’s a perfectly natural way to ...
The maximum endurance condition would be obtained at the point of minimum power required since this would require the lowest fuel flow to keep the airplane in steady, level flight. Maximum range condition would occur where the ratio of speed to power required is greatest. The maximum range condition is obtained at maximum lift/drag ratio (L/DMAX).
Pilots sometimes fly at the aircraft's best L/D by precisely controlling airspeed and smoothly operating the controls to reduce drag. However the strength of the likely next lift, minimising the time spent in strongly sinking air and the strength of the wind also affects the optimal speed to fly. Pilots fly faster to get quickly through sinking ...