Search results
Results From The WOW.Com Content Network
The damaged transistor shows a low-ohmic junction between gate and drain terminals. A parametric failure only shifts the device parameters and may manifest in stress testing; sometimes, the degree of damage can lower over time. Latent ESD failure modes occur in a delayed fashion and include: Insulator damage by weakening of the insulator ...
When optical fibers are exposed to ionizing radiation such as energetic electrons, protons, neutrons, X-rays, Ƴ-radiation, etc., they undergo 'damage'. [1] [2] The term 'damage' primarily refers to added optical absorption, resulting in loss of the propagating optical signal leading to decreased power at the output end, which could lead to premature failure of the component and or system.
The laser damage threshold (LDT) or laser induced damage threshold (LIDT) is the limit at which an optic or material will be damaged by a laser given the fluence (energy per area), intensity (power per area), and wavelength. LDT values are relevant to both transmissive and reflective optical elements and in applications where the laser induced ...
Power outages are categorized into three different phenomena, relating to the duration and effect of the outage: A transient fault is a loss of power typically caused by a fault on a power line, e.g. a short circuit or flashover. Power is automatically restored once the fault is cleared. A brownout is a drop in voltage in an electrical power ...
Catastrophic optical damage (COD), or catastrophic optical mirror damage (COMD), is a failure mode of high-power semiconductor lasers.It occurs when the semiconductor junction is overloaded by exceeding its power density and absorbs too much of the produced light energy, leading to melting and recrystallization of the semiconductor material at the facets of the laser.
Storm damage in Oklahoma today. Several neighborhoods reported some forms of storm damage, while others saw more extensive damage, including downed power lines and shredded roofs.
Damage "does not necessarily imply total loss of system functionality, but rather that the system is no longer operating in its optimal manner". [1] Damage to physical objects is "the progressive physical process by which they break", [2]: 1. and includes mechanical stress that weakens a structure, even if this is not visible. [2]: ix.
Exceeding the power rating of most devices for a very short period of time is not harmful, although doing so regularly can sometimes cause cumulative damage. Power ratings for electrical apparatus and transmission lines are a function of the duration of the proposed load and the ambient temperature; a transmission line or transformer, for ...