Ads
related to: warp beam weaving supplies for sale
Search results
Results From The WOW.Com Content Network
As the warp beam empties its effective diameter changes making the warp slacker- tension is maintained by adding a wooden pulley to the beam, around which are two turns of rope that are attached to mill weights- thus retarding the beam through friction. The cloth beam bears a toothed wheel which works a pinion.
With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams. To become fully automatic, a loom needs a filling stop motion which will brake the loom, if the weft thread breaks.
Warped loom. Warp is wrapped onto the warp beam; as the cloth is made, the fell (woven part) is wrapped onto the breast beam next to the weaver. Wrapping the warp threads around the warp beam of a loom in preparation for weaving. Warp threads in tablet weaving. The warp is the set of yarns or other things stretched in place on a loom before the ...
Barber-Colman knotter. A Barber-Colman knotter is a piece of textile machinery used in a weaving shed. When all the warp carried on the weavers beam has been used, a new beam replaces it. Each end has to pass through the eyes on the existing heddles, and through the existing reed. The knotter takes each new thread and knots it the existing end ...
Three heddle-rods for weaving twill. The warp-weighted loom is a simple and ancient form of loom in which the warp yarns hang freely from a bar, which is supported by upright poles which can be placed at a convenient slant against a wall. Bundles of warp threads are tied to hanging weights called loom weights which keep the threads taut.
Shuttle (weaving) Shuttle with bobbin. A shuttle is a tool designed to neatly and compactly store a holder that carries the thread of the weft yarn while weaving with a loom. Shuttles are thrown or passed back and forth through the shed, between the yarn threads of the warp in order to weave in the weft. The simplest shuttles, known as "stick ...
The other beam is called the warp beam. Beams may be used as rollers to allow the weaver to weave a piece of cloth longer than the loom. As the cloth is woven, the warp threads are gradually unrolled from the warp beam, and the woven portion of the cloth is rolled up onto the cloth beam (which is also called the takeup roll).
Wrapping the warp threads around the warp beam of a loom in preparation for weaving. A beamer was an occupation in the cotton industry. [1] The taper's beam is a long cylinder with flanges where 400 plus ends (threads) are wound side-by-side. Creels of bobbins with the correct thread, mounted on a beaming frame wind their contents onto the beam.