Ads
related to: volvo i shift gear selectorvolvocars.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
In June 2014, [4] Volvo Trucks presented a new dual-clutch version of the I-Shift, known as SPO2812, with overdrive and a maximum torque of 2800 N·m. [5] The dual-clutch version is only available for trucks up to 540 hp. The I-Shift Dual Clutch has two input shafts which are alternatively connected to the engine through two clutches.
I-Shift transmissions [13] is a concept of manual transmission with computerized gear change control Transmission Management System (TMS) which contains two ECU's the transmission control unit (TECU) and the gear selector control unit (GECU). I-Shift borrowed from old transmission technologies like non-synchronised main gears which allowed a ...
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
In most vehicles with a manual transmission, the driver selects gears by manipulating a lever called a gear stick (also called a gearshift, gear lever or shifter). In most automobiles, the gear stick is located on the floor between the driver and front passenger, but some cars have a gear stick that is mounted to the steering column or center ...
This was provided to allow engine braking on downhills or prevent the use of overdrive gears when towing and was typically achieved using positions such as "3", "2", and "1" on the gear selector. An automatic transmission with a manumatic function provides a greater level of control by allowing the driver to request an upshift or downshift at a ...
There was a "signal" button which was the horn. A housing containing four large solenoids was mounted at the transmission which acted on the steel transmission shift control rods. The driver was free to select any gear at will, enabling the bypassing of gears, such as jumping from first to third gear without going through second gear. [2]