Ads
related to: flexible 4 inch hose clamp heavy duty 2 inch
Search results
Results From The WOW.Com Content Network
Screw clamps are normally used for hoses 1/2 inch diameter and up, with other clamps used for smaller hoses. The first patent for a worm-drive hose clamp was granted to Swedish inventor Knut Edwin Bergström [ se ] in 1896 [ 2 ] Bergström founded “Allmänna Brandredskapsaffären E. Bergström & Co.” in 1896 (ABA) to manufacture these worm ...
Side view of a 1.5 to 2.5 inches (38 to 64 mm) adapter. National Hose thread (NH), also known as National Standard Thread (NST). It is the most common type of fire hose coupling used in the United States.
Small-diameter fire hose (3/4–1 inch), often carried on booster reel, preconnected to pump of an engine (and the booster tank) for putting out small fires near the truck without having to connect to a fire hydrant; easily recovered with a motorized reel. Also known as "red line" for the common red rubberized outer layer.
Attack hose is a fabric-covered, flexible hose used to bring water from the fire pumper to the nozzle. This hose ranges in nominal inside diameter from 1.5 to 3 in (38 to 76 mm) and is designed to operate at pressures up to about 400 psi (2,760 kPa). The standard length is 50 ft (15.24 m). [12] Supply and relay hoses
A diver with a SAC of 0.5 cfm (cubic feet per minute) at 100 fsw (4 ata) will consume 0.5 × 4 × 1 = 2 cfm surface equivalent. A diver with a SAC of 1 cfm at 231 fsw (8 ata) for 10 minutes will consume 1 × 8 × 10 = 80 ft 3 of free air – the full capacity of an 80 ft 3 cylinder
Heavy duty (10 bar) hyperbaric stretcher with hatch removed, showing locking rings for hatch and for connecting to full size chambers A hyperbaric stretcher is a lightweight pressure vessel for human occupancy (PVHO) designed to accommodate one person undergoing initial hyperbaric treatment during or while awaiting transport or transfer to a ...