Search results
Results From The WOW.Com Content Network
t. e. Track gauge conversion is the changing of one railway track gauge (the distance between the running rails) to another. In general, requirements depend on whether the conversion is from a wider gauge to a narrower gauge or vice versa, on how the rail vehicles can be modified to accommodate a track gauge conversion, and on whether the gauge ...
The Mount Gambier line in South Australia was fitted with some 3-gauge steel sleepers when it was "temporarily" converted, [ambiguous] pending later proposed conversion to 1,435 mm (4 ft 8 + 1 ⁄ 2 in) (which did not occur, the line being abandoned instead). [citation needed] 1,435 mm (4 ft 8 + 1 ⁄ 2 in) 1,067 mm (3 ft 6 in) Australia
Ridable, outdoor gauge, named according to the gauge in inches, and scale in inches per foot, for example 7 + 1 ⁄ 4 in (184 mm) gauge, 1.5 inch scale. The gauge is 7 + 1 ⁄ 2 in (190.5 mm) in the US and Canada, where the scale sometimes is 1.6 inch for diesel-type models. Private and public (club) tracks exist in many areas.
American Wire Gauge (AWG) is a logarithmic stepped standardized wire gauge system used since 1857, predominantly in North America, for the diameters of round, solid, nonferrous, electrically conducting wire. Dimensions of the wires are given in ASTM standard B 258. [1] The cross-sectional area of each gauge is an important factor for ...
In medicine, the Birmingham gauge specifies the outside diameter of hypodermic needles, catheters, cannulae and suture wires. It was originally developed in early 19th-century England for use in wire manufacture, and began appearing in a medical setting in the early 20th century. Another common needle gauge system is the French catheter scale.
Track gauge. Originally, various track gauges were used in the United States. Some railways, primarily in the northeast, used standard gauge of 4 ft 8⁄ in (1,435 mm); others used gauges ranging from 2 ft (610 mm) to 6 ft (1,829 mm). As a general rule, southern railroads were built to one or another broad gauge, mostly 5 ft (1,524 mm), while ...
If the gauge block is known to be 0.75000 ± 0.00005 inch ("seven-fifty plus or minus fifty millionths", that is, "seven hundred fifty thou plus or minus half a tenth"), then the micrometer should measure it as 0.7500 inch. If the micrometer measures 0.7503 inch, then it is out of calibration.
Sv. ≡ 1 J/kg [44] = 1 Sv = 1 J/kg = 1 m 2 ⋅s 2. Although the definitions for sievert (Sv) and gray (Gy) would seem to indicate that they measure the same quantities, this is not the case. The effect of receiving a certain dose of radiation (given as Gy) is variable and depends on many factors, thus a new unit was needed to denote the ...