When.com Web Search

  1. Ads

    related to: 3.5 x 5 inches size paper height and width

Search results

  1. Results From The WOW.Com Content Network
  2. ISO 216 - Wikipedia

    en.wikipedia.org/wiki/ISO_216

    ISO 216 is an international standard for paper sizes, used around the world except in North America and parts of Latin America. The standard defines the " A ", " B " and " C " series of paper sizes, which includes the A4, the most commonly available paper size worldwide. Two supplementary standards, ISO 217 and ISO 269, define related paper ...

  3. Paper size - Wikipedia

    en.wikipedia.org/wiki/Paper_size

    It has the height of Canadian P4 paper (215 mm × 280 mm, about 8+1⁄2 in × 11 in) and the width of international A4 paper (210 mm × 297 mm or 8.27 in × 11.69 in), i.e. it uses the smaller value among the two for each side. The table shows how this format can be generalized into an entire format series.

  4. Photo print sizes - Wikipedia

    en.wikipedia.org/wiki/Photo_print_sizes

    In the normal series, the long edge is the length of the short edge plus 2 inches (10 in or less) or 3 inches (11 in and above). The alternative Super series, denoted SnR, nR Plus or nR+, has an aspect ratio of 3∶2 (or as close as possible) and thus provides a better fit for standard 135 film (35 mm) at sizes of 8 inches or above. 5R is twice ...

  5. List of disk drive form factors - Wikipedia

    en.wikipedia.org/wiki/List_of_disk_drive_form...

    5.75 in × 3.25 in × 8 in (146.1 mm × 82.55 mm × 203 mm). This smaller form factor, first used in an HDD by Seagate in 1980, was the same size as full-height 51⁄4 -inch-diameter (130 mm) FDD, 3.25-inches high. This is twice as high as "half height"; i.e., 1.63 in (41.4 mm). Most desktop models of drives for optical 120 mm disks (DVD, CD ...

  6. Floppy disk - Wikipedia

    en.wikipedia.org/wiki/Floppy_disk

    Floppy disk size is often referred to in inches, even in countries using metric and though the size is defined in metric. The ANSI specification of 3½-inch disks is entitled in part "90 mm (3.5-inch)" though 90 mm is closer to 3.54 inches. [46] Formatted capacities are generally set in terms of kilobytes and megabytes.

  7. Drive bay - Wikipedia

    en.wikipedia.org/wiki/Drive_bay

    Drive bay. From left to right: full-height 5.25″ drive, two half-height 5.25″ drives, and (sideways) a 3.5″ drive. A drive bay is a standard-sized area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed. Over the years since the introduction of the IBM PC, it and its compatibles ...