Search results
Results From The WOW.Com Content Network
The first iteration of the W-series engine was the 1958 "Turbo-Thrust" 348-cubic-inch (5.7 L), originally intended for use in Chevrolet trucks but also introduced in the larger, heavier 1958 passenger car line. Bore and stroke was 4 + 1 ⁄ 8 in × 3 + 1 ⁄ 4 in (104.8 mm × 82.6 mm), resulting in a substantially oversquare design. This engine ...
Within 18 months, the design of the Chevy II was completed, including new 153 cu in (2,512 cc) four-cylinder and 194 cu in (3,185 cc) six-cylinder engines to power it. The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order.
The 4.3 L (262 cu in) V6 has a 4 in × 3.48 in (101.6 mm × 88.4 mm) bore and stroke, identical to the 350 cu in (5.7 L) Chevrolet V8 engine. To create a true even-fire engine, Chevrolet produced a crankshaft with 30-degree offsets between each rod pin. Consequently, rod journals were increased to a larger 2 + 1 ⁄ 4 inches (57.2 mm).
The Turbo-Thrift 230 (also known as the High Torque 230 in Chevrolet trucks), with 230 cu in (3,768 cc) displacement, replaced the long-stroke 235 cu in (3.9 L) version of the Stovebolt six beginning in 1963. Bore and stroke were 3 + 7 ⁄ 8 in × 3 + 1 ⁄ 4 in (98 mm × 83 mm). It was also used by Chevrolet and GMC trucks, primarily for the ...
Bore and stroke were 3.736 in × 3.48 in (94.9 mm × 88.4 mm), using the 350's crankshaft throw. This new engine family would provide better gas economy than the 350, share its basic architecture and many parts with the 350 (thus reducing production costs), and provide customers with more horsepower and torque than Chevrolet's 1970s-era inline ...
The next year, Chevrolet introduced a full-production long-stroke 3.1 L; 191.3 cu in (3,135 cc) version in the Pontiac 6000 STE AWD, with a 89 mm (3.5 in) bore and 84 mm (3.31 in) stroke compared to the 2.8 which shared the same bore, however with a 76 mm (2.99 in) in stroke. It was produced simultaneously with the 2.8 L (2,837 cc) in various ...
Displacement is 2.2 L; 133.6 cu in (2,189 cc) with an 89 mm × 88 mm (3.50 in × 3.46 in) bore and stroke. 2200s were built at GM's Tonawanda engine plant in Buffalo. This engine was replaced by the LN2 in September 2002. [2] Applications: 1998–2002 Chevrolet S-10, GMC Sonoma, and Isuzu Hombre
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.