Search results
Results From The WOW.Com Content Network
The mirage causes the observer to see a bright and bluish patch on the ground. Light rays coming from a particular distant object all travel through nearly the same layers of air, and all are refracted at about the same angle. Therefore, rays coming from the top of the object will arrive lower than those from the bottom.
Diagram showing displacement of the Sun's image at sunrise and sunset Comparison of inferior and superior mirages due to differing air refractive indices, n. Atmospheric refraction is the deviation of light or other electromagnetic wave from a straight line as it passes through the atmosphere due to the variation in air density as a function of height. [1]
Therefore, people constantly radiate their body heat, but at different rates depending on body and surrounding temperatures. From these values, the rate of heat loss from a person is almost four times as large in the winter than in the summer, which explains the "chill" we feel in the winter even if the thermostat setting is kept the same. [1]
if heat dissipation is poor, so that normally produced waste heat does not drain away properly. Overheating may be caused from any accidental fault of the circuit (such as short-circuit or spark-gap), or may be caused from a wrong design or manufacture (such as the lack of a proper heat dissipation system).
Heat lightning (not to be confused with dry thunderstorms, which are also often called dry lightning) is a misnomer [1] used for the faint flashes of lightning on the horizon or other clouds from distant thunderstorms that do not appear to have accompanying sounds of thunder.
The peak of heat burst conditions is the maximum observed temperature. The beginning of a heat burst is the time during which the air temperature increases without decreasing until after the peak; the end of a heat burst is when the system ceases to affect the temperature and dew point of the area.
A thermostat exerts control by switching heating or cooling devices on or off, or by regulating the flow of a heat transfer fluid as needed, to maintain the correct temperature. A thermostat can often be the main control unit for a heating or cooling system, in applications ranging from ambient air control to automotive coolant control.
Heat engines are not the most efficient ones, and with the use of bimetallic strips the efficiency of the heat engine is even lower as there is no chamber to contain the heat. Moreover, the bimetallic strips cannot produce strength in its moves, the reason why is that in order to achieve reasonables bendings (movements) both metallic strips ...