Search results
Results From The WOW.Com Content Network
Tests can be performed dry, wet with soapy water and bare feet, wet with oil, etc. Over 150 safety criteria have been adopted in Germany and Australia for specific situations — swimming pool decks, commercial kitchens, restrooms, etc. based on the variable-angle ramp, but the ramp itself is not readily portable, so this instrument is only for ...
The dampness results in vaporization where water vapor is transmitted into the building's interiors. Water vapor may enter the building through supply air ducts in building slabs and circulated by warm forced air. Water vapor can also enter a building through leaky return air ducts in homes with crawlspaces. [4]: 185–187
Cement boards may be classified as water resistant as they are not affected by water exposure; however, they do allow penetration and passage of water and water vapor. To waterproof cement boards, a liquid or membrane waterproofing material is applied over its surface. Cement boards should not be confused with gypsum core backer boards.
Tempered hardboard is a hardboard that has been coated with a thin film of linseed oil and then baked; this gives it more water resistance, impact resistance, hardness, rigidity and tensile strength. An earlier tempering process involved immersing the board in linseed oil or tung oil until it was 5 to 6 percent saturated, and heating to 170 °C ...
Dry boards naturally creak under pressure, but these floors were built in a way that the flooring nails rub against a jacket or clamp, causing chirping noises. It is unclear if the design was initially intentional. It seems that, at least initially, the effect arose by chance.
PE and TPV waterstops are generally installed in joints of secondary containment structures to prevent the passage of hazardous fluids other than water such as fuel oils, acids, or process chemicals. [2] The German national standards DIN 18541 [3] and DIN 7865 [4] regulate dimensions and material properties of polymeric waterstops.
Main page; Contents; Current events; Random article; About Wikipedia; Contact us; Pages for logged out editors learn more
Hydronic systems use water or a mix of water and anti-freeze such as propylene glycol [27] as the heat transfer fluid in a "closed-loop" that is recirculated between the floor and the boiler. Various types of pipes are available specifically for hydronic underfloor heating and cooling systems and are generally made from polyethylene including ...