Ad
related to: 5.3 oil pressure maxed out 80 psi cylinder engine
Search results
Results From The WOW.Com Content Network
Even though the OM 138 was designed as a car engine, 3,752 out of 5,719 engines produced were used in trucks. [ A 1 ] The OM 138 marked the beginning of Daimler-Benz car diesel engine production; however, until Volkswagen AG introduced its EA 827 in the Golf I in the 1970s, the diesel engine was uncommon as a passenger car engine in Germany.
In 2009, Ford modified an experimental 3.5 L V6 EcoBoost engine with both E85 direct injection and gasoline indirect fuel injection, which achieved a brake mean effective pressure of 2.72 MPa (395 psi) (27 bar), which translates to roughly 750 newton-metres (553 lb⋅ft) of torque and 316 horsepower (236 kW) at 3000 rpm (flat torque curve from ...
In the United States, FAA specifications [1] state that engines up to 1,000 cu in (16 L) engine displacement require an 0.040 in (1.0 mm) orifice diameter, 0.250 in (6.4 mm) long, 60-degree approach angle. The input pressure is set for 80 psi (550 kPa), and 60 psi (410 kPa) minimum cylinder pressure is the accepted standard.
An evolution of the 1964 DOHC prototype “XJ13” engine, the Jaguar V12 engine is a family of SOHC internal combustion V12 engines with a common block design, that were mass-produced by Jaguar Cars for a quarter of a century, from 1971 to 1997, mostly as 5.3‑litres, but later also as 6‑litres, and 7‑litre versions that were deployed in racing.
2004–2011;The 2.5 Duratec is an inline 5 engine used in the Ford Focus ST225,Kuga,S-Max ST and various Volvo T5 models.It features DOHC, 20 valves and Ti-VCT.It displaces 2521cc and produces 166 kW (225hp) and 320 N.m (236lb.ft) in the ST or 227 kW (305hp) and 440 N.m (324.5lb.ft) in the Focus RS, or even up to 257kW (345hp) and 460 N.m ...
The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.2 and 2.5 litres.Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec ...
The Caterpillar C175 is a family of diesel internal combustion engines made by Caterpillar. The engine is 5.3 litres per cylinder in displacement. The cylinder size is 175 millimetres (6.9 in) x 220 millimetres (8.7 in) bore/stroke. The engine can produce 1500-4800 horsepower at 1800 RPM. The peak torque occurs at an
The engine was a response to BMW's M70 V12 engine, introduced in 1987. While the 5-litre BMW unit developed 300 metric horsepower (220 kW), Mercedes-Benz upped the ante considerably by creating a 6-litre, 300-kilowatt (408 PS) engine. [1] The M120 family was built in Stuttgart, Germany. It has an aluminium engine block lined with silicon/aluminium.