Search results
Results From The WOW.Com Content Network
For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s (3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Plastic lumber
The American Wood Protection Association (AWPA) standards for ACQ require a retention of 0.15 lb/cu ft (2.4 kg/m 3) for above ground use and 0.40 lb/cu ft (6.4 kg/m 3) for ground contact. Chemical Specialties, Inc (CSI, now Viance) received U.S. Environmental Protection Agency 's Presidential Green Chemistry Challenge Award in 2002 for ...
Durability class 1–3, according to European Standard EN 350-2, can be obtained out of non durable (class 5) softwood species. [13] The main disadvantage is that the strength is decreased as a result of the high temperatures. In general the bending strength is reduced up to 30% with more reduction at higher temperatures. [14]
Towards the centre of the trunk, the wood gets less hard. The wood has a Janka ball hardness of 112.5 - 154.7 kgf/cm 2 (1600 – 2200 psi), which is greater than that of oak (70.3 - 84.4 kgf/cm 2) and Douglas fir (35.9 kgf/cm 2). Coconut timber is classified according to three degrees of density: High-density timber (dermal) – hard: 600–900 ...
Solid wood is a term most commonly used to distinguish between ordinary lumber and engineered wood, but it also refers to structures that do not have hollow spaces. Engineered wood products are manufactured by binding together wood strands, fibers , or veneers with adhesives to form a composite material .
The strands in PSL are clipped veneer elements having a least dimension of not more than 1 ⁄ 4 inch (6.4 mm) and an average length of at least 300 times this least dimension (around 6 ft or 1.8 m). [1] It is a member of the structural composite lumber (SCL) family of engineered wood products. [1]
In 1971 "Micro=Lam LVL" was introduced. "Micro=Lam LVL" consisted of laminated veneer lumber billets 4 feet (1.2 m) wide, 3 + 1 ⁄ 2 inches (89 mm) thick, and 80 feet (24 m) long. Troutner proved the structural capabilities of his Micro=Lam product by building a house in Hagerman, Idaho, using beams made of Micro=Lam.
Thermal insulation – CLT panels provide air tightness and great thermal insulation to buildings as the thermal conductivity (U) of a panel is approximately 0.3458 W/m 2 K. [18] Other common building materials can have U values ranging from 0.4 to 2.5 W/m 2 K. [19] The various layers of wood also serve as a thermal mass, which can help reduce ...