Ads
related to: fixed speed wind turbine design for 10 mph wind turbine generator
Search results
Results From The WOW.Com Content Network
An example of a wind turbine, this 3 bladed turbine is the classic design of modern wind turbines Wind turbine components : 1-Foundation, 2-Connection to the electric grid, 3-Tower, 4-Access ladder, 5-Wind orientation control (Yaw control), 6-Nacelle, 7-Generator, 8-Anemometer, 9-Electric or Mechanical Brake, 10-Gearbox, 11-Rotor blade, 12-Blade pitch control, 13-Rotor hub
IEC 61400 is a set of design requirements made to ensure that wind turbines are appropriately engineered against damage from hazards within the planned lifetime. The standard concerns most aspects of the turbine life from site conditions before construction, to turbine components being tested, [ 1 ] assembled and operated.
The tip-speed ratio, λ, or TSR for wind turbines is the ratio between the tangential speed of the tip of a blade and the actual speed of the wind, v. The tip-speed ratio is related to efficiency, with the optimum varying with blade design. [1] Higher tip speeds result in higher noise levels and require stronger blades due to larger centrifugal ...
This is useful for large variable speed wind turbines, because wind speed can change suddenly. When a gust of wind hits a wind turbine, the blades try to speed up, but a synchronous generator is locked to the speed of the power grid and cannot speed up. So large forces are developed in the hub, gearbox, and generator as the power grid pushes back.
The generator, which is approximately 34% of the wind turbine cost, includes the electrical generator, [64] [65] the control electronics, and most likely a gearbox (e.g., planetary gear box), [66] adjustable-speed drive, or continuously variable transmission [67] component for converting the low-speed incoming rotation to high-speed rotation ...
However, very high tip speeds also increase the drag on the blades, decreasing power production. Balancing these factors is what leads to most modern horizontal-axis wind turbines running at a tip speed ratio around 9. In addition, wind turbines usually limit the tip speed to around 80-90m/s due to leading edge erosion and high noise levels.