Ad
related to: radio frequency radar
Search results
Results From The WOW.Com Content Network
The change of repetition frequency allows the radar, on a pulse-to-pulse basis, to differentiate between returns from its own transmissions and returns from other radar systems with the same PRF and a similar radio frequency. Consider a radar with a constant interval between pulses; target reflections appear at a relatively constant range ...
Radar jamming refers to radio frequency signals originating from sources outside the radar, transmitting in the radar's frequency and thereby masking targets of interest. Jamming may be intentional, as with an electronic warfare tactic, or unintentional, as with friendly forces operating equipment that transmits using the same frequency range.
This radar uses radio waves along with horizontal, dual (horizontal and vertical), or circular polarization. The frequency selection of weather radar is a performance compromise between precipitation reflectivity and attenuation due to atmospheric water vapor.
A radar system uses a radio frequency electromagnetic signal reflected from a target to determine information about that target. PRF is required for radar operation. This is the rate at which transmitter pulses are sent into air or space.
The X band is the designation for a band of frequencies in the microwave radio region of the electromagnetic spectrum.In some cases, such as in communication engineering, the frequency range of the X band is rather indefinitely set at approximately 7.0–11.2 GHz.
The National NEXRAD Radar network operates with S-band frequencies. Before implementation of this system, C-band frequencies were commonly used for weather surveillance. In the United States, the 3.55 to 3.7 GHz band is becoming shared spectrum under rules adopted by the Federal Communications Commission in April 2015 as a result of the ...
Continuous-wave radar (CW radar) is a type of radar system where a known stable frequency continuous wave radio energy is transmitted and then received from any reflecting objects. [1] Individual objects can be detected using the Doppler effect , which causes the received signal to have a different frequency from the transmitted signal ...
Ground-penetrating radar uses a variety of technologies to generate the radar signal: these are impulse, [48] stepped frequency, frequency-modulated continuous-wave , and noise. Systems on the market in 2009 also use Digital signal processing (DSP) to process the data during survey work rather than off-line.