Search results
Results From The WOW.Com Content Network
In the 1960s, the term double dabble was also used for a different mental algorithm, used by programmers to convert a binary number to decimal. It is performed by reading the binary number from left to right, doubling if the next bit is zero, and doubling and adding one if the next bit is one. [5]
An 8-bit register can store 2 8 different values. The range of integer values that can be stored in 8 bits depends on the integer representation used. With the two most common representations, the range is 0 through 255 (2 8 − 1) for representation as an binary number, and −128 (−1 × 2 7) through 127 (2 7 − 1) for representation as two's complement.
The full decimal significand is then obtained by concatenating the leading and trailing decimal digits. The 10-bit DPD to 3-digit BCD transcoding for the declets is given by the following table. b 9 … b 0 are the bits of the DPD, and d 2 … d 0 are the three BCD digits.
The memory of the IBM 1620 is organized into 6-bit addressable digits, the usual 8, 4, 2, 1 plus F, used as a flag bit and C, an odd parity check bit. BCD alphamerics are encoded using digit pairs, with the "zone" in the even-addressed digit and the "digit" in the odd-addressed digit, the "zone" being related to the 12 , 11 , and 0 "zone ...
For instance, using a 32-bit format, 16 bits may be used for the integer and 16 for the fraction. The eight's bit is followed by the four's bit, then the two's bit, then the one's bit. The fractional bits continue the pattern set by the integer bits. The next bit is the half's bit, then the quarter's bit, then the ⅛'s bit, and so on. For example:
This table illustrates an example of an 8 bit signed decimal value using the two's complement method. The MSb most significant bit has a negative weight in signed integers, in this case -2 7 = -128. The other bits have positive weights. The lsb (least significant bit) has weight 1. The signed value is in this case -128+2 = -126.
In the decimal encoding, it is encoded as a series of p decimal digits (using the densely packed decimal (DPD) encoding). This makes conversion to decimal form efficient, but requires a specialized decimal ALU to process. In the binary integer decimal (BID) encoding, it is encoded as a binary number.
The first bit always gives the sign of the value(1 = negative, 0 = non-negative), and it is not counted in the m parameter. Thus, the total number w of bits used is 1 + m + n . For example, the specification Q3.12 describes a signed binary fixed-point number with a w = 16 bits in total, comprising the sign bit, three bits for the integer part ...