Search results
Results From The WOW.Com Content Network
This unit was an early semi-automatic transmission, based on the design of a conventional manual transmission, which used a servo-controlled vacuum-operated clutch system, with three different gear shifting modes, at the touch of a button; manual shifting and manual clutch operation (fully manual), manual shifting with automated clutch ...
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
A park by wire system engages the parking pawl of a transmission using electrical means, without the traditional mechanical system which involves linkages between the gear shifter and the transmission. Park-by-wire can be considered a part of a shift by wire system, as it shifts the transmission into park mode. [1]
An automatic transmission with a manumatic function provides a greater level of control by allowing the driver to request an upshift or downshift at a specific time. This is usually achieved using "+" and "-" positions on the gear selector or with paddle-shifters mounted beside the steering wheel.
A direct-shift gearbox (DSG, German: Direktschaltgetriebe [1]) [2] [3] is an electronically controlled, dual-clutch, [2] multiple-shaft, automatic gearbox, in either a transaxle or traditional transmission layout (depending on engine/drive configuration), with automated clutch operation, and with fully-automatic [2] or semi-manual gear selection.
The Ford PowerShift are 6 and 7-speed dual-clutch automatic transmissions, produced for the Ford Motor Company. [1] The 6 speed PowerShift gearboxes were built by Getrag Ford Transmissions, a joint-venture with Getrag,. [2] PowerShift improves fuel efficiency by as much as 10 percent when compared to a conventional automatic transmission. [1]
Pushing a button on the shift control preselected the chosen gear. The electrical circuit was closed only after the driver fully depressed the clutch pedal. This energized the appropriate transmission mounted solenoids necessary for returning the transmission to neutral and then completing engagement of the preselected gear.
A shift kit is also intended to reduce the shift time of a manual vehicle. With a manual transmission , upshift time can be reduced by installing a lighter flywheel . During an upshift, the engine speed must decrease to synchronize with a higher gear; a lighter flywheel will allow the engine speed to drop more quickly, leading to shorter shift ...