Search results
Results From The WOW.Com Content Network
Reducing tire pressure also reduces the extent to which the tires grind against loose surfaces, significantly reducing dust and silt. Another function of CTIS is to maintain tire pressure if there is a slow leak or puncture. In this case, the system controls inflation automatically based on the selected pressure the driver has set. [1]
direct TPM sensor fitted in valve system, manufacturer VDO. In most current designs of direct TPMS, a small electronic assembly which is rugged enough to be mounted inside a tire, measures the pressure using a microelectromechanical system (MEMS) [1] pressure sensor and then transmits this and other information to one or more vehicle receivers. [1]
A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. [1] A TPMS reports real-time tire-pressure information to the driver, using either a gauge, a pictogram display, or a simple low-pressure warning light. TPMS can be divided into two different types – direct (dTPMS) and indirect (iTPMS).
The tyre load index (LI) on a passenger-car tire is a two- or three-digit numerical code used to cross-reference a load & inflation table that will give the maximum load each tire can carry at a given pressure. The load index is sometimes used in conjunction with the load range, which appears elsewhere on the tire.
The Schrader valve is used on virtually all automobile tires and motorcycle tires and most wider-rimmed bicycle tires.In addition to tube and tubeless tires, Schrader valves of varying diameters are used on many refrigeration and air conditioning systems to allow servicing, including recharging with refrigerant; by plumbers conducting leak-down pressure tests on pipe installations; as a ...
Cold inflation pressure is the inflation pressure of tires as measured before a car is driven and the tires warmed up. Recommended cold inflation pressure is displayed in the owner's manual and on the Tire Information Placard attached to the vehicle door edge , pillar , glovebox door or fuel filler flap .
The screw remains captive on the valve body even when unscrewed fully; it is tightened again after the tire is inflated and the pump removed. The valve cap protects the valve body, keeps dirt and mud out of the mechanism, and also prevents the valve from damaging the tube when it is rolled for storage, but is not necessary to prevent pressure loss.
A dustcap is a small cover used on the valve stem of a bicycle or car tire to prevent dust or other small particles from entering the valve and damaging it. Dustcaps are usually made from plastic but may occasionally be made of metal. The dustcap is internally threaded and is secured by screwing it onto the end of the stem.