Ads
related to: toilets under 27 inch depth refrigerator side by side dimensionszlinekitchen.com has been visited by 10K+ users in the past month
Search results
Results From The WOW.Com Content Network
This system is suitable for locations plumbed with 12.7 or 9.5 mm (1 ⁄ 2 or 3 ⁄ 8 inch) water pipes which cannot supply water quickly enough to flush the toilet; the tank is needed to supply a large volume of water in a short time. The tank typically collects between 6 and 17 L (1.6 and 4.5 US gallons) of water over a period of time.
Squat toilet (flush toilet) with water cistern for flushing (Cape Town, South Africa) A squat toilet (or squatting toilet) is a toilet used by squatting, rather than sitting. This means that the posture for defecation and for female urination is to place one foot on each side of the toilet drain or hole and to squat over it.
Low-flush toilet (3212351477) Low-flush toilets use significantly less water per flush than older conventional toilets. In the United States, Older conventional toilet models, typically those built before 1982, can use 5 to 7 gallons of water per flush. Toilets from the era of 1982-1993 may use a somewhat smaller 3.5 gpf.
A low-flush toilet (or low-flow toilet or high-efficiency toilet) is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons (13.2 litres) per flush and they used float valves that often leaked, increasing their total water use.
A typical flush toilet is a ceramic bowl (pan) connected on the "up" side to a cistern (tank) that enables rapid filling with water, and on the "down" side to a drain pipe that removes the effluent. When a toilet is flushed, the sewage should flow into a septic tank or into a system connected to a sewage treatment plant.
A dual flush toilet; note the two buttons at the top of the cistern. A dual flush toilet is a variation of the flush toilet that uses two buttons or a handle mechanism to flush different amounts of water. The purpose of this mechanism is to reduce the volume of water used to flush different types of waste.