Ads
related to: power supply bypass capacitor
Search results
Results From The WOW.Com Content Network
A bypass capacitor is often used to decouple a subcircuit from AC signals or voltage spikes on a power supply or other line. A bypass capacitor can shunt energy from those signals, or transients, past the subcircuit to be decoupled, right to the return path. For a power supply line, a bypass capacitor from the supply voltage line to the power ...
The capacitors act as a local reserve for the DC power source, and bypass AC currents from the power supply. This is used in car audio applications, when a stiffening capacitor compensates for the inductance and resistance of the leads to the lead-acid car battery.
The predominant application of all electrolytic capacitors is in power supplies.They are used in input and output smoothing capacitors, as decoupling capacitors to circulate the harmonic current in a short loop, as bypass capacitors to shunt AC noise to the ground by bypassing the power supply lines, as backup capacitors to mitigate the drop in line voltage during sudden power demand or as ...
A capacitive power supply usually has a rectifier and filter to generate a direct current from the reduced alternating voltage. Such a supply comprises a capacitor, C1 whose reactance limits the current flowing through the rectifier bridge D1. A resistor, R1, connected in series with it protects against voltage spikes during switching operations.
Bleach bypass, an optical effect produced by skipping a step when developing colour film; Bypass capacitor, used to bypass a power supply or other high impedance component; Bypass ratio in turbofan aircraft engines Bypass duct, whose size controls the bypass ratio; Bypass switch, access port for an in-line active security appliance
This is critically important for decoupling high-speed logic circuits from the power supply. The decoupling capacitor supplies transient current to the chip. Without decouplers, the IC demands current faster than the connection to the power supply can supply it, as parts of the circuit rapidly switch on and off.
The capacitors across bias resistors in common emitter BJT amplifiers, or cathode bias resistors in vacuum tube amplifiers are also bypass capacitors (redirects here) or often enough decoupling capacitors. The difference is that they aren't part of the main power supply, but just the bias power supply. But the page mentions power supply too much.
An integrated power supply is one that shares a common printed circuit board with its load. An external power supply, AC adapter or power brick, is a power supply located in the load's AC power cord that plugs into a wall outlet; a wall wart is an external supply integrated with the outlet plug itself. These are popular in consumer electronics ...