Ads
related to: dual plane high rpm sbc casting heads 2 times 8 times 7
Search results
Results From The WOW.Com Content Network
The 1973–1974 L82 was a "performance" version of the 350 that still used the casting number 624 76cc chamber "2.02" heads but with a Rochester Quadra-jet 4bbl carburetor and dual-plane aluminum intake manifold, the earlier L46 350 hp (261 kW) 350 hydraulic-lifter cam, and 9.0:1 compression forged-aluminum pistons producing 250 hp (186 kW ...
The Ford Boss 302 (formally the "302 H.O.") is a high-performance "small block" 302 cu in (4.9 L) V8 engine manufactured by Ford Motor Company.The original version of this engine was used in the 1969 and 1970 Boss 302 Mustangs and Cougar Eliminators and was constructed by attaching heads designed for the planned 351 Cleveland (which debuted the following year) to a Ford small block. [1]
The engine had a remarkably low idle speed of 450 rpm with standard transmission and 375 rpm (while in drive) for the automatic; [5] a modern engine is usually tuned to a minimum 600-700 rpm. The electrical system was a 6-volt primary with a negative ground, and a conventional mechanical ignition , with the firing order 1-6-2-5-8-3-7-4.
Small-valve high-RPM head (valve diameter) 2.19 in (56 mm) intake, 2 in (51 mm) exhaust; Splayed main caps, head bolts tie into main caps. Head bolts do not pull on the cylinder wall causing distortion. Cam drive: fiberglass belt; Maximum RPM (high-RPM engine): over 8000 rpm [citation needed] Engine weight: estimated 550 lb (249 kg) complete
The 5.8 is formally known as the Trinity Engine or 5.8-liter V8 engine, which benefits from cylinder heads with improved coolant flow, Ford GT camshafts, piston-cooling oil jets similar to those found on the 5.0 Coyote, new 5-layer MLS head gaskets, an over-rev function that increases the red line to 7000 rpm for up to 8 seconds (from 6250 rpm ...
With an 8.75:1 compression ratio and a 2-barrel carburetor, the Olds 215 had the same rated hp, 155 hp (116 kW) at 4800 rpm, as the Buick 215, with 220 ft⋅lbf (300 N⋅m) of torque at 2400 rpm. With a 4-barrel carburetor and 10.25:1 compression, the Olds 215 made 185 hp (138 kW) at 4800 rpm and 230 lb⋅ft (310 N⋅m) at 3200 rpm with a ...
The following year the motor became available in the compact Chevy II also. For the 1970 model year the 396 was bored 0.03 in (0.76 mm), resulting in a 402 cu in (6.6 L) engine. Despite this, the motor was still badged as a 396. 1970 was also the final production year for the L78.
These engines vary in displacement between 2.8 and 3.4 litres (2,837 and 3,350 cc) and have a cast-iron block and either cast-iron or aluminum heads. Production of these engines began in 1980 and ended in 2005 in the U.S., with production continued in China until 2010. This engine family was the basis for the GM High Value engine family.