Search results
Results From The WOW.Com Content Network
Deflection aimed WRSB could be tensioned to slightly higher tension and will most probably use 4 wires (ropes). The overall length of the barrier tends to be shorter. Containment based WRSB will have wire ropes spread further apart from each other (approximately 150mm - 60mm), to increase the catchment area.
Sheave – Grooved wheel used to support a moving belt, wire or rope; Sheer legs; Sling (rigging) – Rope, webbing, wire or chain used to support a load for lifting; Rope splicing – Semi-permanent joint between two ropes; Tackle – System of two or more pulleys and a rope or cable; Tirfor – Device for pulling cable; Tugger (rigging)
Hoist atop an elevator. A hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium.
Steel wire rope (right hand lang lay) Wire rope is composed of as few as two solid, metal wires twisted into a helix that forms a composite rope, in a pattern known as laid rope. Larger diameter wire rope consists of multiple strands of such laid rope in a pattern known as cable laid. Manufactured using an industrial machine known as a strander ...
A cable grip is a device for propelling a vehicle by attaching to a wire rope (called a haul rope) running at a (relatively) constant speed. The vehicle may be suspended from the cable, as in the case of aerial lifts such as a gondola lift ( télécabine ), may be guided by rails , as in a cable traction railway , or may be self-guiding, as in ...
A lifting hook with a safety latch. A lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane.A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.
Modern highline rigging typically entails a mainline of webbing, backup webbing, and either climbing rope or ultra-high-molecular-weight polyethylene rope for redundancy. However, many highlines are rigged with a mainline and backup only, especially if the highline is low tension (less than 4,000 N (900 lbf)), or rigged with high quality ...
Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving their strands. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together. [ 1 ]