Ad
related to: vinyl ester resin will cure with mekp 4 0 x 32 cigar
Search results
Results From The WOW.Com Content Network
MEKP is a colorless oily liquid. It is widely used in vulcanization (crosslinking) of polymers. [3] It is derived from the reaction of methyl ethyl ketone and hydrogen peroxide under acidic conditions. Several products result from this reaction including a cyclic dimer. [4] The linear dimer, the topic of this article, is the most prevalent.
Since vinyl ester resins must be pre-accelerated with amine accelerator or cobalt, their processing time at room temperature is shorter than with epoxy-based prepregs. Catalysts (also called hardeners) include peroxides such as methyl ethyl ketone peroxide (MEKP), acetyl acetone peroxide (AAP) or cyclohexanone peroxide (CHP).
Vinyl ester resin is extensively used to manufacture FRP tanks and vessels as per BS4994. For laminating process, vinyl ester is usually initiated with methyl ethyl ketone peroxide. It has greater strength and mechanical properties than polyester and less than epoxy resin. Renewable precursors to vinyl ester resins have been developed. [2]
Thus, organic peroxides are useful as initiators for some types of polymerization, such as the acrylic, unsaturated polyester, and vinyl ester resins used in glass-reinforced plastics. MEKP and benzoyl peroxide are commonly used for this purpose. However, the same property also means that organic peroxides can explosively combust.
Conventional dielectrometry is carried out typically in a parallel plate configuration of the dielectric sensor (capacitance probe) and has the capability of monitoring the resin cure throughout the entire cycle, from the liquid to the rubber to the solid state. It is capable of monitoring phase separation in complex resin blends curing also ...
Vinyl ester resins made by addition reactions between an epoxy resin with acrylic acid derivatives, when diluted/dissolved in a vinyl functional monomer such as styrene, polymerise. The resulting thermosets are notable for their high adhesion, heat resistance and corrosion resistance.
Similarly, DGEBA reacts with acrylic acid to give vinyl ester resins. The reaction results in opening of the epoxide ring, generating unsaturated esters at each terminus of the molecule. Such materials are often diluted with styrene and converted to resin. Epoxy resins are thermosetting polymers, which are crosslinked using hardeners (curing ...
Once the mandrel is completely covered to the desired thickness, the resin is cured. Depending on the resin system and its cure characteristics, often the mandrel is autoclaved or heated in an oven or rotated under radiant heaters until the part is cured. Once the resin has cured, the mandrel is removed or extracted, leaving the hollow final ...