Search results
Results From The WOW.Com Content Network
A semiconductor detector in ionizing radiation detection physics is a device that uses a semiconductor (usually silicon or germanium) to measure the effect of incident charged particles or photons. Semiconductor detectors find broad application for radiation protection , gamma and X-ray spectrometry , and as particle detectors .
Based on device structure, photodetectors can be classified into the following categories: MSM Photodetector: A metal-semiconductor-metal (MSM) photodetector consists of a semiconductor layer sandwiched between two metal electrodes. The metal electrodes are interdigitated, forming a series of alternating fingers or grids.
Hybrid pixel detectors are a type of ionizing radiation detector consisting of an array of diodes based on semiconductor technology and their associated electronics. The term “hybrid” stems from the fact that the two main elements from which these devices are built, the semiconductor sensor and the readout chip (also known as application-specific integrated circuit or ASIC), are ...
SPADs are semiconductor devices that are based on a p–n junction that is reverse-biased at an operating voltage that exceeds the junction's breakdown voltage (). [3] " At this bias, the electric field is so high [higher than 3×10 5 V/cm] that a single charge carrier injected into the depletion layer can trigger a self-sustaining avalanche.
Charge coupled device (CCD) cameras were first applied to transmission electron microscopy in the 1980s and later became widespread. [3] [4] For use in a TEM, CCDs are typically coupled with a scintillator such as single crystal Yttrium aluminium garnet (YAG) in which electrons from the electron beam are converted to photons, which are then transferred to the sensor of the CCD via a fiber ...
Infrared detectors generally work by detecting the radiation emitted by an object, and the intensity of the radiation is determined by factors such as the object's temperature, distance, and size. Unlike most infrared photodetectors, QWIPs are independent of the band gap of the detecting material, because they are based on the optical ...
A position sensitive device and/or position sensitive detector (PSD) is an optical position sensor (OPS) that can measure a position of a light spot in one or two-dimensions on a sensor surface. Principles
The devices are two chips that are put together like a sandwich: one chip contains detector elements made in InGaAs or HgCdTe, and the other chip is typically made of silicon and is used to read out the photodetectors. The exact date of origin of these devices is classified, but they were in use by the mid-1980s. [citation needed]