Ads
related to: stock gm connecting rods ebay
Search results
Results From The WOW.Com Content Network
Within 18 months, the design of the Chevy II was completed, including new 153 cu in (2,512 cc) four-cylinder and 194 cu in (3,185 cc) six-cylinder engines to power it. The 153 cu in engine had a 3 + 7 ⁄ 8 -inch (98 mm) bore and 3 + 1 ⁄ 4 -inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing ...
The 400 is the only engine that uses a 2.65 in (67.3 mm) main bearing journal and a 2.1 in (53.3 mm) rod bearing journal. The connecting rod was also 400 specific being 5.565 in (141.4 mm) as opposed to the 5.7 in (144.8 mm) rod used in all other small-block Chevrolet engines.
The only parts carried over from the 1978 engines were the connecting rods. [5] Peak power increased to 90 hp. For 1980 the Iron Duke engine was redesigned to be mounted transversely, to suit the new front-drive General Motors "X-body" cars. The bellhousing bolt pattern was revised to match that of the new 60° V6 engine.
The connecting rods used on the 4.3 L (262 cu in) are therefore unique to this engine, being 5.7 inches (140 mm) in length, but having the larger 2 + 1 ⁄ 4 inches (57.2 mm) journals. The 4.3 L (262 cu in) also used larger valves than the 229 cu in (3.8 L) V6, with a 1.94-inch (49.3 mm) intake valve and a 1 + 1 ⁄ 2 -inch (38.1 mm) exhaust ...
The GMC straight-6 engine was a series of gasoline-powered straight-six engines introduced in the 1939 model year by the GMC Trucks division of General Motors.Prior to the introduction of this new engine design GMC trucks had been powered by straight-six engines designed by the Buick, Pontiac and Oldsmobile divisions of GM.
The Chevrolet small-block engine refers to one of the several gasoline-powered vehicle engines manufactured by General Motors. These include: The first or second generation of non-LS Chevrolet small-block engines; The third, fourth, or fifth generation of LS-based GM engines; The Chevrolet Gemini small-block engine
The EMD 645 is a family of two-stroke diesel engines that was designed and manufactured by the Electro-Motive Division of General Motors.While the 645 series was intended primarily for locomotive, marine and stationary engine use, one 16-cylinder version powered the 33-19 "Titan" prototype haul truck designed by GM's Terex division
The major differences of the 350 in comparison to other GM V8s are Buick's "deep-skirt" engine block construction, the use of cast iron with increased nickel content, under-square cylinder bore sizing, 3 in (76.2 mm) crankshaft main journals, and 6.385 in (162.2 mm) connecting rods. Of all the GM "350s", the Buick has the longest piston stroke.