When.com Web Search

  1. Ads

    related to: michelin tire diameter chart

Search results

  1. Results From The WOW.Com Content Network
  2. Tire code - Wikipedia

    en.wikipedia.org/wiki/Tire_code

    Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

  3. Michelin TRX - Wikipedia

    en.wikipedia.org/wiki/Michelin_TRX

    The Michelin TRX, (and the related TDX), is a radial tire introduced by the Michelin Group in 1975. It is one of the first volume-produced low-profile tires. Although technologically advanced, and reasonably successful, the tire's requirement for a non-standard rim ultimately condemned it to a relatively short commercial life.

  4. Wheel sizing - Wikipedia

    en.wikipedia.org/wiki/Wheel_sizing

    Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.

  5. Formula One tyres - Wikipedia

    en.wikipedia.org/wiki/Formula_One_tyres

    As Formula One wheel rim diameter size will switch from 13 to 18 in (330 to 457 mm), the tyre diameter of 2022-spec Pirelli Formula One tyres will also be altered, from 670 to 720 mm (26.4 to 28.3 in), while the tread width of 2022-spec Pirelli Formula One tyres are expected to be unchanged.

  6. Michelin PAX System - Wikipedia

    en.wikipedia.org/wiki/Michelin_PAX_System

    The similarly sized PAX tire was designated 245-680R460A, indicating the same 245 mm tread section, but a 680 mm overall diameter (a specification not in the conventional passenger car tire nomenclature), the R, meaning radial construction, a 460 mm wheel seat diameter (approximately 18.1 inches) and A for asymmetric, meaning that the wheel is ...

  7. ISO 5775 - Wikipedia

    en.wikipedia.org/wiki/ISO_5775

    The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from the marking the maximum dimensions of a tire, which are needed by designers to determine clearance distances to other bicycle components.