Search results
Results From The WOW.Com Content Network
PuTTY user manual (copy from 2022) PuTTY (/ ˈ p ʌ t i /) [4] is a free and open-source terminal emulator, serial console and network file transfer application. It supports several network protocols, including SCP, SSH, Telnet, rlogin, and raw socket connection. It can also connect to a serial port. The name "PuTTY" has no official meaning. [5]
The High-Speed Serial Interface (HSSI) is a differential ECL serial interface standard developed by Cisco Systems and T3plus Networking primarily for use in WAN router connections. It is capable of speeds up to 52 Mbit/s with cables up to 50 feet (15 m) in length.
In general, parallel interfaces are quoted in B/s and serial in bit/s. The more commonly used is shown below in bold type. On devices like modems , bytes may be more than 8 bits long because they may be individually padded out with additional start and stop bits; the figures below will reflect this.
A male DE-9 connector on an IBM PC compatible computer (with serial port symbol) used for an RS-232 serial port A female DE-9 connector on an RS-232 cable.. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel.
The Opcode consists of 2 bits. There are two possible opcodes, read '10' or write '01'. PA5. 5 bits, PHY address. RA5. The Register Address field indicates the register to be written to or read from. It is 5 bits long. TA. The turn-around field is 2 bits long. When data is being written to the PHY, the MAC writes '10' to the MDIO line.
Packet Tracer is a cross-platform visual simulation tool designed by Cisco Systems that allows users to create network topologies and imitate modern computer networks.The software allows users to simulate the configuration of Cisco routers and switches using a simulated command line interface.
64-bit memory addressing is also added, but is only permitted when there is no equivalent 32-bit address. [30] The Intel Z170 chipset can be configured to implement either this bus or a variant of the LPC bus that is missing its ISA-style DMA capability and is underclocked to 24 MHz instead of the standard 33 MHz. [32]