Ad
related to: otg micro a plug diagram printable
Search results
Results From The WOW.Com Content Network
An OTG cable has a micro-A plug on one end, and a micro-B plug on the other end (it cannot have two plugs of the same type). OTG adds a fifth pin to the standard USB connector, called the ID-pin; the micro-A plug has the ID pin grounded, while the ID in the micro-B plug is floating. A device with a micro-A plug inserted becomes an OTG A-device ...
Edited to correct the fill colors: white areas represent cavities in the plugs; grey areas represent volumes filled with insulating material. Als corrected the orientation of the micro plugs: on the micro-B plugs the top side (which is the side on which the USB logo is (supposed to be) stamped) has the terminals and the chamfers on the housing.
The OTG device with the A-plug inserted is called the A-device and is responsible for powering the USB interface when required, and by default assumes the role of host. The OTG device with the B-plug inserted is called the B-device and by default assumes the role of peripheral. An OTG device with no plug inserted defaults to acting as a B-device.
IOIO-OTG pinout/connection diagram. The second-generation IOIO boards (known as IOIO-OTG) contain the following on-board features: [37] [38] [39] As the name suggests, a key feature of this generation is the introduction of USB-OTG, supporting USB master or slave mode. This enables the IOIO to connect to older Android phones that only support ...
Use: The first transaction in each (micro)frame. An SOF allows endpoints to identify the start of the (micro)frame and synchronize internal endpoint clocks to the host. Frame number: This is a frame number that is incremented by the host periodically to allow endpoints to identify the start of the frame (or microframe) and synchronize internal ...
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made.
The legacy USB Type-A plug. This is one of many legacy types of USB connector. The design is intended to make it difficult to insert a USB plug into its receptacle incorrectly. The USB specification requires that the cable plug and receptacle be marked so the user can recognize the proper orientation. [34] The USB-C plug however is reversible.
The Samsung Galaxy S III, and later Galaxy Note II and Galaxy S4, use an 11-pin connector and the six additional connector pins in order to achieve functional improvements over the 5-pin design (like simultaneous USB-OTG use [25]). However, if consumers have a standard MHL-to-HDMI adapter all they need to purchase is a tip.