Ads
related to: do i need displayport 2.1 to 3.0
Search results
Results From The WOW.Com Content Network
[8]: §4.2.1.7, p201 The standard DisplayPort connector pin allocation is as follows: [8]: §4.2.1 12 pins for the main link – the main link consists of four shielded twisted pairs. Each pair requires 3 pins; one for each of the two wires, and a third for the shield. [8]: §4.1.2, p183 (pins 1–12)
DSC version 1.2 was released on 27 January 2016 and is included in version 1.4 of the DisplayPort standard; DSC version 1.2a was released on 18 January 2017. The update includes native encoding of 4:2:2 and 4:2:0 formats in six-pixel containers, 14/16 bits per color, and minor modifications to the encoding algorithm.
The data is transmitted via the cable connecting the display and the graphics card; VGA, DVI, DisplayPort and HDMI are supported. [ citation needed ] The EDID is often stored in the monitor in the firmware chip called serial EEPROM (electrically erasable programmable read-only memory) and is accessible via the I²C-bus at address 0x50 .
SlimPort is a proprietary alternative to MHL, based on the DisplayPort standard integrated into common Micro-USB ports, and supports up to 1080p60 or 1080p30 with 3D content over HDMI 1.4 (up to 5.4 Gbit/s of bandwidth), in addition to support for DVI, VGA (up to 1920 × 1080 at 60 Hz), and DisplayPort. [28]
DisplayPort 2.0 can support higher than 8K resolution at 60 Hz losslessly due to new UHBR 10, 13.5, and 20 signaling standards (DSC 1.2 used in DisplayPort 1.4 for that resolution is not lossless) in 8 bit and 8K 60 Hz with 10 bit color and use up to 80 Gbit/s (effective bandwidth 77.37 Gbit/s), which is double the amount available to USB data ...
USB-C connectors can transmit DisplayPort video to docks and displays using standard USB type-C cables or type-C to DisplayPort cables and adapters; USB-C also supports HDMI adapters that actively convert from DisplayPort to HDMI 1.4 or 2.0. DisplayPort Alternate Mode for USB type-C specification was published in 2015.