Search results
Results From The WOW.Com Content Network
The Cabinet approved a subsidy of Rs.200 per 14.2 kg LPG cylinder for up to 12 refills per year.The total expenditurewill be Rs.6,100 crore for financial year 2022-23 and Rs.7,680 crore for 2023–24. Average LPG consumption of PMUY consumers has increased by 20 percent from 3.01 refills in 2019–20 to 3.68 in 2021–22.
A modern self-contained HPLC Schematic representation of an HPLC unit (1) solvent reservoirs, (2) solvent degasser, (3) gradient valve, (4) mixing vessel for delivery of the mobile phase, (5) high-pressure pump, (6) switching valve in "inject position", (6') switching valve in "load position", (7) sample injection loop, (8) pre-column (guard column), (9) analytical column, (10) detector (i.e ...
The Indian Institute of Petroleum and Energy Act, 2017 (No.3 of 2018) enacted by the Parliament and declared the Institute as an 'Institution of National Importance'. IIPE has achieved this prestigious status by joining with the major oil and gas corporations such as HPCL, IOCL, ONGC, OIL & GAIL.
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
A calibration gas is a reference gas or gas mixture used as comparative standard in the calibration of analytical instruments, like gas analysers or gas detectors.Therefore, a calibration gas has to be of a precisely defined nature or composition, like zero gas or span gas, for example 500 ppm carbon monoxide in nitrogen.
A propane tank car after a fire, the HAZMAT 1075 symbol can be seen in red as a warning of the danger posed by the gas. A gas is a substance which (a) at 50 °C (122 °F) has a vapor pressure greater than 300 kPa (43.51 PSI) or
Flammability diagram, green dotted line shows safe purging of an air-filled vessel, first with nitrogen, then with methane, to avoid the flammable region. The limiting oxygen concentration is shown in the lower right of the diagram.
This standard test is required for HAZMAT Class 2 Gases and for determining refrigerant flammability classifications. This standard uses visual observations of flame propagation in 5 or 12 L spherical glass vessels to measure the flammability limits.