When.com Web Search

  1. Ads

    related to: best half face respirator mask

Search results

  1. Results From The WOW.Com Content Network
  2. Respirator assigned protection factors - Wikipedia

    en.wikipedia.org/wiki/Respirator_Assigned...

    The APF for negative pressure half mask respirators are twofold. But this difference cannot be considered separately from recommendations for use of respirators. The use of half-face masks in the US is limited to 10 PEL for the "worst case" - work in the polluted atmosphere of 8 hours per day, 40 hours a week.

  3. Elastomeric respirator - Wikipedia

    en.wikipedia.org/wiki/Elastomeric_respirator

    Full-face elastomeric respirators generally seal better. [2] For substances hazardous to the eyes, a respirator equipped with a full facepiece, helmet, or hood is recommended. [35] Eyeglasses can clash with elastomeric masks. Conventionally, full-face masks are modified, with prescription lenses inserted into the mask.

  4. Respirator - Wikipedia

    en.wikipedia.org/wiki/Respirator

    An open circuit SCBA typically has three main components: a high-pressure gas storage cylinder, (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and a respiratory interface, which may be a mouthpiece, half mask or full-face mask, assembled and mounted on a framed carrying harness. [72]

  5. European respirator standards - Wikipedia

    en.wikipedia.org/wiki/European_respirator_standards

    R (reusable): if the filtering half-face mask can be used for more than one working day, so it is reusable. Additional suffixes include: Anti-clogging NR masks (D). When the half mask has passed the dolomite dust test, a letter D can be added to indicate that the service life may exceed 8 h. [14] Example: FFP3 NR D. Valve.

  6. Self-contained breathing apparatus - Wikipedia

    en.wikipedia.org/wiki/Self-contained_breathing...

    An open circuit SCBA typically has three main components: a high-pressure gas storage cylinder, (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and a respiratory interface, which may be a mouthpiece, half mask or full-face mask, assembled and mounted on a framed carrying harness. [2]

  7. Respirator fit test - Wikipedia

    en.wikipedia.org/wiki/Respirator_fit_test

    U.S. law requires employers to offer employees a mask with large enough fit factor. For half face-piece masks (used when the concentration of harmful substances is not more than 10 PEL), the fit factor should not be less than 100; and for full face masks (not more than 50 PEL), the fit factor should not be less than 500. The safety factor of 10 ...