Ad
related to: 1.15 inches on a ruler printable mm size
Search results
Results From The WOW.Com Content Network
The millimetre (SI symbol: mm) is a unit of length in the metric system equal to 10 −3 metres ( 1 / 1 000 m = 0.001 m). To help compare different orders of magnitude , this section lists lengths between 10 −3 m and 10 −2 m (1 mm and 1 cm).
If using the metric unit meters for distance and the imperial unit inches for target size, one has to multiply by a factor of 25.4, since one inch is defined as 25.4 millimeters. distance in meters = target in inches angle in mrad × 25.4 {\displaystyle {\text{distance in meters}}={\frac {\text{target in inches}}{\text{angle in mrad}}}\times 25.4}
medium-bore refers to calibers with a diameter of 0.33 inches (8.4 mm) to 0.39 inches (9.9 mm) large-bore refers to calibers with a diameter of 0.40 inches (10 mm) or larger There is much variance in the use of the term "small-bore", which over the years has changed considerably, with anything under 0.577 inches (14.7 mm) considered "small-bore ...
This is a list of firearm cartridges that have bullets in the 9 millimeters (0.35 in) to 9.99 millimeters (0.393 in) caliber range. Case length refers to the round case length. OAL refers to the overall length of the loaded round. All measurements are given in millimeters, followed by the equivalent in inches between parentheses.
A metric ounce is an approximation of the imperial ounce, US dry ounce, or US fluid ounce. These three customary units vary. However, the metric ounce is usually taken as 25 or 30 ml (0.88 or 1.06 imp fl oz; 0.85 or 1.01 US fl oz) when volume is being measured, or in grams when mass is being measured.
8-, 5.25-, 3.5-, 2.5-, 1.8- and 1-inch HDDs, together with a ruler to show the length of platters and read-write heads A newer 2.5-inch (63.5 mm) 6,495 MB HDD compared to an older 5.25-inch full-height 110 MB HDD. IBM's first hard drive, the IBM 350, used a stack of fifty 24-inch platters and was of a size comparable to two large refrigerators.
In the United States, the term statute mile formally refers to the survey mile, [3] but for most purposes, the difference of less than 1 ⁄ 8 inch (3.2 mm) between the survey mile and the international mile (1609.344 metres exactly) is insignificant—one international mile is 0.999 998 US survey miles—so statute mile can be used for either.
211.9 mm (8.34 in) straight hand's width spithamē σπιθαμή: 12 daktyloi 231.2 mm (9.10 in) span of all fingers pous πούς: 16 daktyloi 308.2 mm (12.13 in) foot: pygmē πυγμή: 18 daktyloi 346.8 mm (13.65 in) forearm pygōn πυγών: 20 daktyloi 385.3 mm (15.17 in) distance from elbow to fist pēchys πῆχυς: 24 daktyloi